Search results

Hi Rob, If you take the stalk out and apart on the back remove circuit board (4 torx screws) then lift out white plastic insert you can see when when high beam is selected a small lever pushes up. Just glue something on top of that. A bit of trial and error but I would think a thin washer...

Hi All, whilst trying to fix my indicator/high beam switch not being able to momentarily flick to high beam without turning them on, which is now resolved by glueing a packer (washer in my case) in the right place inside the switch I have been able to make my indicators now self cancel as they...

Hi All, Been to look at car again, I checked injection pipes and 3 and 6 had been reversed by me! Once put on correctly idle improved but still low 500rpm and extremely slow to rev up again to 2500 max. Armed with a more positive father at hand he suggested putting inlet manifold back on and...

I’m probably going to look at car again tomorrow eve so can try the tapping method and see the outcome, yep I tackled the seals in situe so ribs are still aching now! I did label the injection pipes near the injectors for each cylinder but didn’t label them on pump as I thought they could only...

Hi there, Purchased a P38 dse with known problems around 2 months ago mainly Electrical although had a diesel leak as well. Finally got round to sorting FIP leak, it was from where pump head meets pump body. I also changed the 2 top seal’s as well as marking the pump up carefully. Car...

Seems to say it’s compatible with l322

Thanks again, I’ve just been looking at icarsoft v3 and it’s states it does air suspension although not sure if it can calibrate height sensors? It also says it works on other models of cars so would be handy.

Thankyou will look into that

Hi all, just introduced myself on new member thread. As my 2003 l322 TD6 has been some what troublesome so far I am looking a getting a good diagnostic tool. I have a few cheap obd2 ones very basic. Would like to get one that can help with many of the problems I may encounter with the car...

Hi all, decided to join so hopefully can help others with problems as this site has been very helpful to me already as you can read post without being a member. purchased an 03 TD6 l322 170k mileage around 3 months ago as it’s my wife’s dream car. Car was a bit taty/dirty and had been stood for...