Search results

No just welding I’ve had it running with the bleed screw out but no fuel coming out of the hole. Turn the motor off and hand pump the lift pump and i get a good amount of fuel out. I’ve put the plastic spacer in ? Is that correct as it’s never had one in the 30 years I’ve had her. it’s been...

I did I’ll take it off tomorrow see if it works. Thanks again 🙏🙏👍

I’m going to try that next I’ll get some decent pipe and replace everything. New copper washers check everything that I can think of. Thanks for your advice 👍👍

Hi Anaconda yes I’ve checked the solenoid all good It’s a brand new filter. I can only think it’s getting air in there some where. But with a full filter it will run fine until it drains the filter.

Thanks for your help. I’ll try it tomorrow 👍

Hi lynall thank you for your reply. no recent work done recently The problem started after having my Land Rover back from being worked on by my mechanic. I did actually tell a Cornish man there was no rush and do it directly. If you ever been to Cornwall. You’ll know what this means the Land...

Hi guys, I have a problem with my 200 TDI. I have replaced the lift pump as the engine would only run for a couple of minutes and then it would die. I’m trying to restart it with belch white smoke which I think is under fuel when I bleed the fuel filter, I can get fuel spirting out, but when I...

Hi guys, I wonder if any can help me with my 200 TDI will not run for more than two minutes then starts belching white smoke under fuel. I think I have changed the diff pump and a new filter all the returns from the injectors I have replaced the hoses. I noticed when I was bleeding it that the...