Search results

Yes Thanks to you and otheres here that have helped me through the whole rebuild. On the Brake switch there is think its green/brown that goes to battery when I tested them with wires, can this go to one of the fuse boxes as it does work off both when touching wire to them , Also one thing that...

Ran out if bloody fuel, the sender does work but mustn't have it right, the gauge does move when putting fuel in, and lowers when getting used, think sender in tank just needs a bit of tweaking to get it right.

Just took fuel line off st carb and no fuel coming out when turning it over

Going to check them, just wondering if I've knocked a wire off somewhere but can't see anything out of order yet

Yes there is 12 volt on both, the ignition is turning it over when turning key

Put fully charged battery back on and now the dam thing won't start, turning over OK but won't fire up . Before I took battery off it would start first turn of the key, not sure what I've done now

Thanks gonna give it another go tomorrow when battery is charged. Cant understand why the Alt is not charging as good as it used to though. Everything else working now Thanks to you Mate, Could not have done this without you. If you ever need any parts ask me first never know I might just have it,

Yes forgot to mention, it is not charging now as it should for some reason, it used to go up to 14 when running but now lucky if it reaches 13 usually under after revving the engine a little . The charge light was just a temporary bulb but did sort another out today, might need to drill the...

Great thanks no what to do now. Bloody brand new batrerys gone flat with all the testing of lights ect, what's best way to charge slow or fast, don't want to damage it

Pic of bracket, holes match up with the bolts that hold pedal box on, Test wired it up to the brake light wires and it works fine both brakes on and off on button on switch. Just a matter of fitting it now, not sure if I can fit it without that guard or not.

Thats great Thanks got an Idea now, I have the bracket but cant find the Guard but there is one here that I think should fit, 569601 Land Rover Series brake light switch protector cover plate | eBay Ordered loads more spade terminals from Toolstation too gonna get all the wires tidied up and...

Just seen this before I left, didnt have time to check any voltages but did swap Yellow and White at Stalk and now seems to be working as it should, Forward Main, Middle Dipped and flashes with lights on or off, then again it has a mind of its own when O go up tomorrow it could be different, but...

Well done Exactly as above but Still No Joy now still at stalk Forward Dipped. Middle High. When flicking towards for flash Still will only flash with side light's or No light's, Not with Lights On

Great Thanks So Drivers side, the 2 U/Ws joined and connected to Main Beam Black wire on H4, and the U/R to Dipped Beam White wire on H4? Pasenger side. U/W to Main Beam Black wire on H4, and the U/R to Dipped Beam White wire on H4 ? Yellow Earth Discard the U and make safe. Or...

BLUE is connected to Yellow at Stalk and the other U/W s then to one of the B/R s at Stalk.

Preety sure That thin U/W goes up in to dash and is joined to another of the same coming out from dash then the others that go to one of the B/R s on stalk, will confirm tonight

So wires marked in these pics connected to wires marked on H4, do I have to join any together ?

You were right Mate the brown was not connecting the U and UW changed the connector and now they are joined. On the H4 I have yellow Ground is White Dipped and Black Main ? Going to look back over the posts again to see what goes where again as I disconnected wires at headlights.

Yes know what you mean, think I might have a connector, if I don't have one should I join them together ?

Well these wires are a right mess, couldnt really tell what went where as when I started taking tape off some of the wires have been extended but with different colors where they were joined, Right hop you can understand this lot. In Dash U goes to Yellow, on column stalk which is joined to...