Search results

Fuel pump relay yes sorry your beer goggles tricked you. My P38 is a 1999 model diesel manual

Fuel pump relay yes. one contact has power but not the other. if i bridge the 2 i get fuel but she still dies after starting. So why no power out to pump, Could it be the inertia switch which i have pressed but could it be faulty

I get that. I have 12 v at feed to relay but not out. What would cause this

But when i put current to the relay points the pump works and she still only stars but dies. Glowplugs not working off key but it could be a relay.

My P38 had an engine change by previous owner. Ican get her to start by direct feed to relay 12 but she starts and revs and then dies, almost like it only gets enough fuel to start and dies. My in tank fuel pump was not working and glow plugs not working from key. Light goes out but no power to...

Not quite sure about that as my 1 99 model had plastic. The other 99 had alu and my 00 had alu

Thanks all

Relay 12 and fuse 39 to be precise. For the fuel pump must still find one for Glowplugs. Anyone know why the P38 had different inlet minifolds. Had 3 1999 jeeps and 2 had Alu ones and 1 had a plastic one

Which relay is for the glowplugs and which for fuel pump on a 99 P38 diesel

65k miles only second owner from new. Rescued from 14 years in a shed. Needs dents removed and a spray job but runs like a dream. Found foldable seats handles were bend away and covered by the commercial conversion for Irish market. On a second hand galvo chassis. Started first turn

Yeah have to take some then load onto my laptop but will do shortly. Not a tech type just the basics hence my daily drive now is a 95 Disco 1 with 65k miles from new. put on a second hand galvo chassis. She has zero rust but treated the heck out of her. Now sporting a winch bumper and bash...

Will get the vehicle and do my test bits first then post whatever a cannot figure out

Any specific treads to look up

Hi all i joined a while back but got slapped for not introducing myself first and ran away for a hole somewhere. I am in Ireland and have had several landies in my life. I currently have a 95 Disco 1 with low miles and just sold my 99 P38. I was very impressed with the P38 so going to buy...

Hi. Can i pick your brain about the EDC. I have power to the glow plugs and solenoid and diesel into the injector pump but not out. Removed the spring and plunger on the solenoid but still no go. Cranks over and immobilizer seems to work. Timing looks correct. I am in Ireland and mine is a Jap...

New to the forum but been watching a long time, not new to Landies. Had a few and have a few again. Live in Ireland but from South Africa. Was wondering if anyone knew how to get replacement door tops for a disco 1