Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    2.5 ton paperweight??

    It was covid itself, & I caught it in HOSPITAL when I visited my now departed wife, I ended up in hospital for a month, I was the oldest on the ward & only myself & another fella survived out of 8, it screwed my immune system & consequently I cop for everything & anything going! But Im still...
  2. M

    2.5 ton paperweight??

    Well dear friends, here I am back again after several re-visits to hospital, docs etc ( all due to covid ). Anyroadup, I HAVE managed to spend a few hours now & again messing with the paperweight. ALL the plugs & sockets in footwells have been cut/soldered & heatshrinked. NO DIFFERENCE!! The...
  3. M

    2.5 ton paperweight??

    It looks so good it may even be a later replacement fusebox! I WILL however, pull it out again & go over it with a glass!
  4. M

    2.5 ton paperweight??

    One of the first things I did when I got it, pulled it apart, looked new, cut all the bus-bars along the edges, opened it up, again all like new, folded it back together, re-soldered all those connecting bars. Actually, if you could se it, you'd think it was new! This is DEFINITLEY an historic...
  5. M

    2.5 ton paperweight??

    Got the BeCM back today, apparently the internal data was corrupted, no physical damage, all software related, & was corrected. Great! At last I had great expectations, all refitted & connected back up, Ahh, everything exactly as before :( Well at least I know its NOT the BeCM!! Had a...
  6. M

    2.5 ton paperweight??

    Bit the bullet & sent off BeCM with key to 'Rick the pick at Callrova in Brighton, it'll be interesting to see what develops??
  7. M

    2.5 ton paperweight??

    Just so I know, if I disable the EKA/Imob, is it reversable?
  8. M

    2.5 ton paperweight??

    👍
  9. M

    2.5 ton paperweight??

    That's great, thank you yet again, I think i WILL disable them both then, so that will be a couple of possible problems out of the way! So does that also mean that if the battery is disconnected for some time in the future, it can be re-connected & the key will work 'normally' without resetting...
  10. M

    2.5 ton paperweight??

    Been messing again with the Nanocom & found a 'disable EKA' or something like that, so if I disable it, will I have to look & unlock with the key or will the remote actions still be available?? If not, what does it mean?
  11. M

    2.5 ton paperweight??

    Remember the ECU's on a P38 are frequently fussy about diagnostic connection. BECM only with ignition off, HEVAC often takes 2-3 attempts, but usually best in ignition positions 2 & 3. ABS only connects below 5mph. EAS must have a good delay timer !! WOW! I didn't know that! My BeCM only works...
  12. M

    2.5 ton paperweight??

    I have tied the Nanocom modules that wont connect with the key in position 1, 2 & even engine running & completely off. I have a very good multi-meter & test probe, but since I'm no elctrikery teckie, am reluctant to do anything more than check voltages & continuity. Is there a way I can pop out...
  13. M

    2.5 ton paperweight??

    Yes, I think that will be my next move.
  14. M

    2.5 ton paperweight??

    Well dear friends hair pulling is making me bald!! I've checked & double checked every connector, earthing point I can find, ALL are like new, I feel there is a common denominator from years old MOT fails & the faults still showing & why diagnostics wont communicate, but I don't know what it is...
  15. M

    2.5 ton paperweight??

    Yeah, I know WHAT they are, I was asking if you thought something's amiss as they are NOT in yellow sleeving. No leaks, dry everywhere. All connections seem shiney!
  16. M

    2.5 ton paperweight??

    Had another shuffling around the plugs etc when I noticed that one of the SRS set of wires is NOT in the yellow sleeving, but it does enter into the main loom. I was under the impression that ALL SRS is in the yellow stuff, could this be a past owner mod? Should I investigate further??
  17. M

    2.5 ton paperweight??

    OK, Nanocom delivered ( at great cost ) :( Registered it, hooked it up, imported all the various module codes, all seems to work ok BUT, yet again, there a some modules it cant/wont communicate with, BECM works fine, as does the EDC, doesn't connect to ABS, SRS, or EAS, & these are the ones...
  18. M

    2.5 ton paperweight??

    Ah ok, Nanocom on its way!
  19. M

    2.5 ton paperweight??

    OK, i'll bite the bullet & go for the Nanocom, just hope its a good as everyone says it is!
  20. M

    2.5 ton paperweight??

    Blackbox just got back to me stating that the Faultmate modules are the same as Rovacom ( doesn't say so in their website ) Now then, the cost of the extra modules comes to £370.00, do you think a Nanocom will be a better bet for a few quid more?? Cos there's a fair bit if faff with Rovacom...
Back
Top