Search results

hello, is there any possibility to convert a long code to a short one? I have nanocom, and a friend bought a new key from ebay. Unfortunately, there is no 6-digit code inside, only a sticker with long-code.

Ok, I went for a more detailed test with nanocom, and found out that HDC and TRC were disabled from BCU Instruments. Now, when starting engine with CDL engaged, I have the TC and ABS lights on. Shall I search more for HDC light to come on? Btw, when turning ignition in, it does light up...

I have read all these posts and I already know the ways I will have to go through. Considering I like to have everything working properly, I will be looking for a newer SLABS unit SRD500070. I am wondering why I'm not getting all the 3 amigos on like others do

Hello guys, Few days ago I finished working on my D2. I installed a rebuilt Transfer Box from Ashcroft with 1.41 ratio to compensate the large tires. The transfer box was also built with diff lock, sleeved case, hd cross pin and hi capacity sump. Basically,I did everything for the transfer box...

for these tires, if you haven't changed the diff ratio yet, the transfer box will be very lazy...

what's the full size?

My auto box is removed from car for seals replacement, I bet there will be oil only inside of Torque converter... I might think also about changing the flexlate now with Ashcroft’s HD, once the gearbox is out. If so, I might end up with only 1 change?

question: if I plan to change the fluid in transmission 2 times, now and after 1-2 weeks once again, so that I will change as much fluid as pos... when do I have to change the Filter, and O-rings? Both times? or only first time?

Ok, will order the genuine. Not a big difference in price between vaico and gen for me. Thank you

Can I have your opinions regarding transmission filter (strainer)? shall I go genuine only or aftermarket?

FYI, BOSCH 0 280 160 575 has a smaller hole than Genuine. many guys from Russia are often drilling the hole to match the genuine’s diameter. Some of them, are driving with this regulator as is.

Ok, few years ago I bought a Bosch 0 280 160 575 and installed it in the defender I was driving. I noticed the holes between genuine and bosch were different (bosch is smaller). I upload a photo so that you can see that too. currently, I’m on the market for a new FPR for my D2. I would like to...

OK, FTC4738 x 8 units? My steps listed above are good? any other suggestions for my jobs? I want that this workshop jobs are being done only once.

I agree, this might be too, but, anyway, the transmission needs to be unmounted to replace that seal. I ordered it also, because I wanted to do all these things one time. also, I would prefer to change the HD flex plate which I have in my garage since last year...

I know this, but the supplier is important to me, as I am focused on quality first. I have to choose now, genuine LR for £50 or aftermarket Bearmach for £3 empty and re-fill, 2 times. also, I have another question. my transmission is leaking a little between transmission housing and engine. I...

I plan to flush the transmission fluid in next month. I would require a new filter and seals. What do people say about aftermarket filters? shall I take one of them because it costs few pounds? or shall I only take the original one which costs a lot?

drove the car few more days and everything looks fine. I will order a new MAP sensor, just to forget the Inlet Air Temperature error... Is there any possibility to avoid seeing again the EGR fault?

I did new adjustments and I ended to get 227.77Kpa (manifold pressure) at 100.12Kpa (ambient pressure). This result I got with 9 threads left. I think this is the limit I have to stop at, because the 360 000 kms on the odometer may mean that the turbo is not in perfect condition anymore. Am I...

what max boost shall I let there to have enough power and avoid overboost? 235kpa?

hello again, here are my observations again: I did another check in the morning of IAT and outside temperature. The difference was 2*C. I expect that recently, the bottom pipe of the wastegate modulator fell off, and, during the fuel pump replacement I did not observe this. Therefore, I noticed...