Search results

When the car would not move I then tried to drive in 4 wheel low, including locking the diff by moving the small gear selector into the centre, hard across to the left and then in both the forward towards the engine position and towards the rear of the car position but no drive in any. As I...

Have had a look at the rave disc I just bought, lists a whole load of specialist tools, are these recommended or can the half shafts be removed without them

heres a update: Have got all four wheels off floor, turn the rear wheels and the rear propshaft turns ok, turn either of the front wheels and the front propshaft does not turn. Which would you recommend, remove plate front front diff and see if all is enganged and turning ok, or take out...

Hi, have got the car on axle stands, prop to front axle is turning when put in both forward and reverse gear and clutch up but no drive at front wheels, rear prop is not turning at all, have tried changing the gear ratio no difference, I would think that there is two problems. 1. The front...

The propshaft frrom the transfer box to the front axle starts to rotate but knocks and fails to drive, the propshaft to the rear axle does nothing, tries to change gear ratio but no different, I beleive either the transfer box is faulty internally or the selector to the transfer box is faulty.

I have got a 1997 discovery 2.5 tdi, will accept geras but will not drive, sounds like a problem with the transfer box, is there any problems that many be causing it, gear rod linkerage come loose ect, also if I do have to swop the transfer box what problems will I encounter. thanks

Im going to try and replace the two bottom engine mounts first as I have a sus****ion that the rubber may be gone in them. People have told me that it could be the rear diff mounts but how could it be that if it was still juddering with the front prop off. The trouble with the clutch is that I...

Hi when im accelerating to move off from the junction the car judders and is usually worse when doing hill starts etc. the car has had a total new top engine mount, ive checked its all tight etc, ive also removed the front propshaft to make it 2wd as i thought that was the problem, but there...

Hi, Could anybody please advise if the 3 and the 5 door 1998 freelander both had the same propshaft please as I need to replace mine. I have sourced a 5 door used but mine is the 3 door model. Thank you for all your replies

When you fit the new MLS head gasket, you only fit the shim/extra layer if you have the head skimmed, the idea is that you keep the compression the same as when it was first manufactured.

Hi People, I have a 2002 Westminster fitted with Sat Nav as standard, I do 50K miles a year, the sat nav when you become experienced with it is easy to use, it depends on how often each driver has a need to use it. The only complaint I have is obtaining updates, does anybody have any...

Hi, Mine is a 2002 P38 4.0 Westminister petrol converted to LPG, I have had mine three years and done 85k out of the 104k miles it has done, It is a true workhorse, does everything, goes everywere and there is no other 4x4 to match it. I would highly recommend that you get it inspected by...

Hi fellow members, I have one of the last P38 (registered 2002) 4.0 Westminister so I have been told, the car has now done 104,000 miles and has created a stutter, just passed MOT with two new lambada sensors fitted, it has been conversted to LPG about 70,000 mile ago when I bought it, any...