Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. deangermouse

    FL1 speedo problem

    Hi I recently brought a 2000 1.8 commercial FL1. The gearbox needed replacing as it had no reverse gear. Fitted replacement gearbox but since then speedo has not worked. Changed the drive on the top of the gearbox but still no speedo. Anybody have any ideas? TIA
  2. deangermouse

    FL1 speedo problem

    Hi I recently brought a 2000 1.8 commercial FL1. The gearbox needed replacing as it had no reverse gear. Fitted replacement gearbox but since then speedo has not worked. Changed the drive on the top of the gearbox but still no speedo. Anybody have any ideas? TIA
  3. deangermouse

    Freelander 1.8L V early model not starting

    The leads go 1 2 3 4 from left to right. It's the firing order that is 1 3 4 2.
  4. deangermouse

    Freelander 1.8L V early model not starting

    I'm breaking a 2000 FL1 1.8 petrol (listed on for sale section ) if you need anything
  5. deangermouse

    Breaking FL1 1.8

    Breaking 2000 FL1 dark green 1.8 petrol. No prop, vcu or ird.
  6. deangermouse

    Freelander 1.8L V early model not starting

    [/GALLERY][/GALLERY] Yes mate
  7. deangermouse

    Freelander 1.8L V early model not starting

    No sorry mental block. 1 is at top left 2 is top right 3 is bottom left 4 is bottom right I was thinking mirror image, not enough coffee
  8. deangermouse

    Freelander 1.8L V early model not starting

    Looking at the cap from the battery /passengers side Number 1 is top right (2 o'clock ) Number 3 is bottom right (5 o'clock ) Number 4 is bottom left (8 oclock) Number 2 is top left (10 o'clock )
  9. deangermouse

    Freelander 1 New Clutch

    I have a similar fault with my spare fl. Cranks for ages but won't start. I have to crank it for 10 mins until the battery is flat and then swap batteries, it starts fairly easy then. Guess I need a new battery and move it somewhere I can jump start it. Once it's started it starts everytime...
  10. deangermouse

    Freelander 1 Bottom crankshaft pulley

    Pulley, bolt and washer £20 Inc p&p. Message me if you need it. Cheers
  11. deangermouse

    Freelander 1 Bottom crankshaft pulley

    I will remove it tomorrow and let you know cheers
  12. deangermouse

    help needed please

    Hi, i would get a set of impact sockets and a breaker bar, small cost compared to the grief if you round of one of the bolts, also the ird unit is a lot heavier than it looks. its tight and hard work but i broke 2 rathets (1 guaranteed for life) using an "extension bar" on my ratchet. Good luck
  13. deangermouse

    Freelander 1 Bottom crankshaft pulley

    Hi, i am breaking a 2000 1.8 petrol freelander, are you after just the outer pulley and bolt, or the inner timming belt gear that the pulley sits on? i could remove all 3 parts if you need them? dean
  14. deangermouse

    FL1 1.8 breaking 2000

    Hi I will have a look at it during the week to see what condition it is in. cheers Dean
  15. deangermouse

    FL1 1.8 breaking 2000

    Yes £10 Inc p&p do you have PayPal cheers dean
  16. deangermouse

    FL1 1.8 breaking 2000

    ooops, meant sub frame (and the whole car really) think it was left near the sea for a few years!
  17. deangermouse

    FL1 1.8 breaking 2000

    breaking FL1 1.8 petrol, good engine etc, No prop, chassis is rotten, Green. 2000 model mail me if you need parts located SW Scotland
  18. deangermouse

    Freelander 1 1.8 - Possible fuel pump issue, extreme bodge-up wiring under seat mats

    Hi, i am about to break a 2000 1.8 freelander if you need anything,
  19. deangermouse

    Freelander 1 She only really revs very occasionally.... 02' TD4

    Hi, not trying to put a dampner on the issue any further, but when my vac pipes were cracked and not sealing (it was the pipe running along the injectors and down the back of the engine) my brakes were crap, really crap, up to the point where if you tried to press the brake pedal twice quickly...
Back
Top