Search results

ok, cheers gstuart . It may just be gunked up like you and everyone said. I was just a bit wary of digging it out to much, but will give this a go now tomorrow. I'll let you know how I get on ;):):)

ok, cool, thanks chaps. I'll have another go at it tomorrow and maybe use some mole grips on it as it seems to be completely rounded off. Hopefully if it comes out, I can top it up ok then. Thanks again, much appreciated :):)

Thanks gymmaniac . Is it a plastic pug tho because it seems to be really soft, I cant seem to get anything to grip onto it... When you say a 1/2 inch drive, is that a spanner or socket that fits in the middle (sorry for being a dumass non mechanic) o_Oo_Oo_O

Ive noticed some oil that's been coming out from the rear prop shaft on my disco 2. Ive been told its the prop shaft seal, which is apparently quite a easy fix. Not being a mechanic, its going to be a garage job, but in the mean time, I was told to check the oil level in the rear prop shaft by...

Hi all, I currently have a mag mount on the roof for the Amm Radio and CB, but am going to change these to gutter mounts. Is there any natural holes or routes I can feed the leads through into the inside of the car, ideally without drilling holes. I hope to mount them on the front end of the...

Hi ronsealdeath, yea, I did the same and wired it to my reversing lights now, mime was the green / Brown wire (probaĺly the same as yours ). I can see the tow hitch great as well. Bit of a shame I can't see the bumpersides, but I count with my other one I had on my Suzuki either. At least I can...

Update I have now moved the rear camera onto the bumper. It sits just above the tow hitch but back far enough it wont get clobbered by a trailer being hitched up. The view is quite good, I can see the top of the tow ball which is the furthest part back on the vehical and the wide angle view...

Hi Intestinalworm , I have recently got hold of one of these cameras for reversing. 7" Wireless LCD Rearview Monitor + Bus Car Caravan LED Reverse Backup Camera Kit, ebay...

Thanks Stanleysteamer I would imagine that's more likely the problem. I cant recall or seeing the wading plugs being fitted or checked when the gearbox was put on. Next time its on the ramps, I'll get my chap to have a look and see if there are any fitted. If not, I'll try and get hold of some...

Umm, :rolleyes::rolleyes::rolleyes: Thanks jamesmartin and discool. I think this one makes sense. Maybe it was a bit deeper than thought, or as discool says, it could be a oil seal gone or maybe dried out. It was a secondhand box we put in that had been lying about for a while.... in a field I...

Hi all, I recently drove my Disco2 TD5 through a small ford, only bumper height. Didn't have no initial problems... But, it was due a gearbox oil change shortly afterwards because we had put a replacement one in earlier (Manual). When we took the FILL plug out, a load of watery gunk poured...

Ok thanks, I.have tried bridging the connectors, so I'm guessing they havnt put the right pressure in. Maybe why I was told to pit it in his mates garage for a electrical test but didn't want me about whilst they did it and said they would 're gas it for free. I might be being sinical, but that...

brill, thanks sierrafery At least I know where the ac sensor is. I did wonder if it was that one. If I unscrew it, and replace the sensor, would that discharge any gas in the ac system? Secondly, I can now try and chase the other BY wire I posted in the image. That does look like its coming...

Thanks sierrafery , Thanks for your reply and help, I think it may possibly be to do with the TPS as you mentioned as a earth. It kind of looks like someone had added a spade connector to it, as if they were going to put it on a earth point / connection somewhere and its snapped off (probably...

not too sure how that happened.... at least it's.done now

Inkjets1Member Hi all, Appoligies if I have this question in the wrong.thread, hopefully it's.ok. I have a yellow and black wire coming up from the loom that connects to the EMC, but it's connected to anything and just.has a spade connector on with another.one spliced into it. It's.a long.shot...

Well, update on mine and maybe linked in a way to gjmac s problem. Although I have now got a cheep multimeter, my dearest wife spotted a 2nd hand Hawkeye locally. Ended up buying this because it was coded for the D2 same as ours. I was able to check air con relay and also clutch; both...

yea, cheers iansoady. I have only just got a copy of the RAVE book. Ive seen it mentioned lots on here but had no success in tracking a copy down or any results from Google... just RAVE's to go and get drunk at lol.. :(:( But, the other night whilst searching on a Ausy Land Rover site there was...

ah, pics of ,mine.... just re-read your msg.. I'll get some posted...

I will definitely stick with it mate, its got personal now lol... I must be so close because everything works fine when you bridge the relay plugs, so it must be something connected to the relay that's blocking the signal. I think I may get a cheep multi metre to help, rather than just pulling...