Search results

Hi Datatek - i have not got a nano com, so I can’t read the faults - would i also need that to calibrate the heights? As a bit of background it worked fine when driven from the garage but collapsed about a 100m later on leaving the M5.

Hmmm. Any chance you can add a bit of detail to this please for an ignoramus like me? Where is the air release diagram and what does it look like?

I should say I have tested the pressure from the pump and the air dryer and they are both strong.

I have new air bags, reconditioned pump and valve block, and a set of emergency valves. With the EAS module disconnected it stays up. When I connect the EAS module it immediately opens the valves in a series of sharp exhaust whistles - more like farts actually - and drops it to its stops. Should...

Awesome advice. I am trying to diagnose a similar problem.

I’ll try that. Thanks.

Somewhat typically, the day after posting this my drivers side latch broke too!

My L322 does that, but the p38 never has.

or these? https://www.ebay.co.uk/itm/222644094051?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=kgWH_cYeRgW&sssrc=2349624&ssuid=XJFN7g0FQrC&var=&widget_ver=artemis&media=COPY...

something like this? https://www.ebay.co.uk/itm/274043301878?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wKXHYALHTTO&sssrc=2349624&ssuid=XJFN7g0FQrC&var=&widget_ver=artemis&media=COPY

Oh. It does not sound good then if it’s a BeCM fault?

Good news. Both hazards and indicators are actually working, it is just the audible ‘tick’ that has disappeared.

Thanks to you and @Datatek - I’ll check and come back.

Hi all, any pointers on where I should look to diagnose/fix the indicators not responding when they should? I have a copy of RAVE but flicked through several hundred pages on my ipad and not found anything relevant yet. No reference to them in the manual for which fuse they are on, or could it...

Cheers. EAS currently not working. Relying on a manual bypass system. However, yes, the kit comes with new bump stops for just that eventuality, however, I am far from convinced they are sufficient as when i reconnected the eas module recently it dropped to the bump stops but the tyres fouled...

Ah. Coils. that will make a big difference. Mine grate the liners at about 20 to 30 deg, when the diagonal between the inside front edge and outer rear edge create the maximum diameter and snag the liner. At full lock they are ok.

Thanks DT, You’re right, 235/85 which is apparently 31.7”. So I probably made a mistake calculating the speed difference, which is comforting. However, I am having issues with the arch liners. Did you use spacers on yours?

I’m curious about the fire - how did it do that? By far the majority of car journey are short. If you use an EV for those then take your Rangey for the long journey - that’s what I do. Or the missus’s Lexus… If you win on the roundabouts but lose on the swings - but do far more roundabouts than...

Yes, still on air. Just a body lift, looks awful, but hopefully effective. See here. https://www.ebay.co.uk/itm/264508926558?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JFB7Hu-uQf6&sssrc=2349624&ssuid=XJFN7g0FQrC&var=&widget_ver=artemis&media=COPY I’ll let you know when I have done a few...

Also, even with current electric prices, still only costs 4p a mile to run!