Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    PROPLEMS

    Hi people I have just had it plugged in and only thing coming up is driver input, but I have found the harness the gas the air mass plug on has been rubbing the idle wheel as the airmass is disconnected guess I didn't tuck the harness away properly it had cut through 2 wires I will re connect...
  2. M

    PROPLEMS

    first off merry Christmas every one I have a 02 plate td5 discovery I am doing injector seals tomorrow but yesterday I noticed when ever I turn left at lowish speed it was getting a hiccup like a miss I picked my son up this morning and turned left boom hiccup then no power no response from...
  3. M

    Td5 rough running when first started from cold

    Back to this problem pump is pumping fine new fuel filter , cam to it this morning cranked fired died then cranked again fired died 3rd time cranked fired ran like a bag of **** made its ggggggrrrrrhhhh noise again revs picked up ran fine presssed the throttle flat as a fart held it then it just...
  4. M

    Td5 rough running when first started from cold

    Yes there is a faint smell of derv in the oil so am leaning more to injector seals weekend job I think
  5. M

    Td5 rough running when first started from cold

    I do have the water in fuel light on the dash will that do it
  6. M

    Td5 rough running when first started from cold

    Ok so the cars been sat at work cold start fires and runs like a bag of s**t revs pick up then go to idle speed press the throttle down really lazy rev increases back the revs off put the throttle down again a little slow the boom revs as normal, would it more likely to be injector seals as in...
  7. M

    Td5 rough running when first started from cold

    Sounded like the pump was running it stopped then started again then stopped and started again so on
  8. M

    Td5 rough running when first started from cold

    Did the 5 pushes on the pedal to prime the system left it for 5 min still no different
  9. M

    Td5 rough running when first started from cold

    Would injector seals cause this ?
  10. M

    Td5 rough running when first started from cold

    Could it be the fuel filter housing with the shuttle valves in
  11. M

    Td5 rough running when first started from cold

    No I will try that in the morning if it starts better where dose that lead me ??
  12. M

    Td5 rough running when first started from cold

    Hi people just wanting to no if yous could shed some light on my problem, I have a 02 plate td5 discover 133,000 when I go to start her in the morning cranks as normally 2-3 turns she fires but runs rough ( like low on fuel ) then revs pick up then makes a funny noice as in the abs pump...
  13. M

    Correct VCU silicone oil

    That is silicone oil silicone fluid
  14. M

    Correct VCU silicone oil

    30.000 cst silicone fluid For just road use 100.000 for road and off road
  15. M

    Correct VCU silicone oil

    30.000 cst silicone fluid That's the 1
  16. M

    Correct VCU silicone oil

    Have anyone got the correct grade of viscous silicone oil for VCU unit or oil catalogue numbers or where to buy ?
  17. M

    4x4 fault I think

    Well people I went to the freelander this morning in s must feild where she is parked in reverse watching the wheels the 1 back wheel spun but the more you drive it round I lose the drive to the back wheels has to be the VCU right, I for got to mention the freelander stood for 2 years and never...
  18. M

    4x4 fault I think

    Yer don't think it has enough friction
  19. M

    VCU repair kits ???

    Is there any VCU repair kits don't want to buy a new 1
Back
Top