Search results

I occasionally get the hollow bolts which connect the leak off pipe to the injector bodie coming loose and getting diesel everywhere. I tighten as much as I dare! Has anyone used Loctite on these at all please?

5 small stone jars from Wirral to somewhere near Worcester please!

I had this and it took me ages to find the problem. It was old tyres and the wall had gone out of shape on them

I would just work my way around the earths on the individual lights first, clean up and secure

Hah! Same Mini in the very cold winter of 81-82 (-20c). Drove to North Wales and screen washer bottle froze up. Pi**ed in it to get it going and to be able to see through windscreen. Wiper mechanisms corroded and jammed up two weeks later

Old K Reg Mini 850 in 1980's. Driving with new girl friend trying to impress her. Had to stop half way up hill. Lift bonnet and blow out the fire on the voltage regulator. Then carry on nice and cool like

Need to shift 3 sizeable roof trusses (7m long, 2.2 high, would lay flat on a flatbed). Looking for any recommended hauliers who could do a part or backload. Or someone with a hell of a trailer! Willing to pay decent amount

Looking to cart a small piece of farm kit from Bridport to Worcester. Will need a minimum 10ft trailer. 100 notes if anyone can help

Absolutley, do this with the long bar and socket

until I was driving along the motorway and the vibrations got more and more until my teeth were chattering. As I pulled in with an obvious flat I say the smoke from the tyre. Fixed that on the hard shoulder. Went to tyre station next day and noticed diesel dripping from underneath engine. Got...

and depending on your vehicle you may need to remove the round gearbox cross member which bolts across the chassis, I always have to

On the old style light I woke up to mine having been on all night. It was condensation above it causing an earth. Fitted a piece of rubber above it between headlining and roof and been fine since

Well it didn't take long. Undo front grill screws (I left bottom two in) enough to get your hand in to slot a socket onto the bolt that secures cable to the bonnet catch. Undo. From cab undo the back nut on the handle end of the cable and slide away from bracket. Pull the whole lot out into cab...

Snapped on me last night! How much of a job is it to replace it. Looks OK until it disappears under the wing. Will I need to remove grill/radiator to make the connection to the catch?

Sorry sold now

Nice Webley & Scott Vulcan Air Rifle, .22 calibre. A model from late 80's but a reliable and classic. A few marks here and there but easily worth £120. Would let it go for £100. Collect at Worcester or maybe some arrangement

Have 110 pick up which I don't use a cover on. Has front spots and a light bar on roof with 4 forward facing work lights. I need something on the back. Either flat mounted on the back panels near the tailgate (so would want a live feed from sidelight and light would need a switch on it). Or...

Will soon be taking off the timing belt housing to fix a leak (right back to engine). Want to make a good job of the seal around the back of water pump and by the ladder rack. Which RTV would you recommend please. In the past I have used the old blue hylomar for anything to do with water and red...

Why not get them reconned? I can recommend a good place in Worcestershire

Done about 2k on new front disc pads, fitted about two years ago. They recently have taken to really squealing for the first few times I use them in a day. Seems to wear off. Is it likely just to be surface rust on the discs or do I need more copper grease behind them