Search results

Do them in the correct order and keep pumping!

Should have said 200 tdi 110

Filled up to the top of tank yesterday and 100 miles this morning. The this afternoon 200 yards and I had 10 mins of tickover and surging. Clearly fuel starvation. The back to normal and OK so far. New filter about 600 miles ago. Anyone point me to where the fuel tank breather comes out of or...

1991 110, 200 tdi which only has the PDWA operated light (Pressure Differential Pressure differential warning actuator, situated on bulkhead). Have fitted new Brake Master Cylinder today which has the fluid level sensor and yellow switch on the cap. I don't have any electrics on for this. I am...

Good guy in Worcester if that's not too far? PM me if you need contact

Well, had a very full day on Thursday. Have had a leak from the intermediate gasket inbetween the timing cover chest and the block for a while, oil and water, so decided to strip it right back to sort it. (Defender 200 tdi). Had done cambelt before so familiar with that, but rear cover needed to...

Even when stationery if I turn my steering hard full lock I get a noise I can only describe as a cross between a scream and a quack. Presumably power steering pump but why??

My money is on CV joints, I had similar and that sorted it

So this shows head and top and underside of gasket. Underside stuck to block in places. Grateful for any observations!

200 TDI had reconned 3 years ago. Been fine, but did have a boil up about 18 months ago as lost some coolant through a gasket. A few months ago did a long journey and quite a bit of oil dripping our of air filter at end, being blown there through cyclone breather. Changed that. Another long...

So out of interest what RTV are you using and from where please?

Thanks James, m/c is moisture content??

So do you mean a faulty servo?

Defender 110 200 tdi. Recently noticed that if I am sat stationery with engine on that if I press hard on brake pedal it will go down slowly, just a touch. No fluid leaking and had a new master cylinder about 3 years ago, discs 1 year ago and drums./shows about 10k ago. Any suggestions?

Thanks for your help, have changed it for a new one and replaced air filter. Will see how it goes

Its a 200 tdi which was reconned about 3 years ago. Havent ever changed breather but washed it out several years ago. Havent checked crank case pressure, will have a look. Perhaps just put a new cyclone on and see what happens?

Yep that's the one

Did 100 miles last night and this morning noticed an oil patch. Is dripping from the small vent on the air filter casing. Turbo seems OK and looks like it is coming from the pipe attached the the cyclone thingy. Not had this before. Any suggestions please??

TDI, will try new washers then