Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    Defender door button and latch

    Hi there, should there be a retaining clip where I have circled please, on the rod from the lock button to the latch?
  2. S

    Defender door button and latch

    Thanks (From a TD5?)
  3. S

    Defender door button and latch

    Defender TD5 90. When I press the passenger door outside button it now doesn't unlatch the door. It had taken a few attempts but now doesn't work at all. It opens fine using the internal pull lever. Before I take door panel off etc any suggestions as to whether it is the button, latch or some...
  4. S

    Wanted to hire for a weekend

    Transporter trailer for towing on a TD5 to collect a small vintage trailer. Must have a working winch and pref be in Worcestershire
  5. S

    TD5 start up groan

    New to the TD5 engine as had a 200 tdi before. When I start up from cold, after a few seconds I get a groan from the nearside of the engine. (Appears to be coming from left side as I sit in cab). Goes on for about 4 seconds and then never happens when engine is warm. Its not the engine itself...
  6. S

    Body repairs

    Anyone know anyone in Worcestershire who could do a few body filling and spraying repairs on a Landy for £ tokens..?
  7. S

    TD5 Radio Mounting

    Any tips for mounting a radio firmly in a Defender TD5. The plastic surround looks like it might be missing a lug or two and appears to have to take all the weight of the radio. Wrap it in foam perhaps? Or any decent mods I can get for the mounting?
  8. S

    H Reg 110 Pick up 200tdi for sale

    My 110 pick up has failed its MOT. Needs some patches on chassis (easy) but also welding up around front outriggers which may need the bulkhead off (which needs replacing anyway). Dont have the time for this as I need a working vehicle. Original Defender 200 tdi engine, fully reconned 2 years...
  9. S

    Land Rover 90/110 Pick up wanted

    As above, needed for a farm based workhorse. Must be good all round, chassis, bulkhead and engine. Would consider TD5 or 200/300 tdi. Up to £10k for right machine, pre Midlands area. What's out there please?
  10. S

    Bulkhead swap 110

    planning to do this in the summer.... are there any good "how to's" and or lists of things I may need (other than time, money and patience)
  11. S

    110 Rolling chassis

    Wanted. Defender 110 Rolling chassis. Anything considered.
  12. S

    Spanner/socket for rear propshaft bolts

    Thanks guys and I did mean 14mm. Didn't know such a tool existed. On order now
  13. S

    Spanner/socket for rear propshaft bolts

    Have to change the propshaft. Bolts and nuts move Ok but its a slow old job inching them around with a 13mm open ended spanner. Is there a special (thin) ring spanner/ratchet spammer or even a thin wall long socket that anyone uses to get onto them?
  14. S

    Loss of drive to rear wheels

    Defender 200tdi 110. Ok, have been getting a rattle when going downhill in gear but backing off. Though it was propshaft UJ's but not long since I did those. Jacked her up today. If I jack both rear wheels free of the ground and put it in gear, it tries to pull away from the front ones, with no...
  15. S

    Increasingly vague steering

    Thanks both, will take a look when it stops raining..................
  16. S

    Increasingly vague steering

    Getting a lot of vague slack on steering wheel. All the wheel bearings OK and new drop arm last year. Opened bonnet and grasped the knuckle joint of the steering rod. With engine off I can turn this either way to make steering wheel move about 20 degree each way, with no wheel movement. Guess it...
  17. S

    Rear Work Light on 110 Pick up

    Have Defender 110 Pick up. Could do with a rear work light off the back of the Cab. Already have a front light bar with 3 lights on top of cab. But would need rear light switched separately and presumably it's own relay. Or perhaps a low current LED taking a feed from inside light?? Perhaps...
  18. S

    200 tdi Bulkhead supplier

    Planning ahead it looks like I might need to replace the bulkhead. Any recommendation for anyone who can supply new or refurbished/galv please?
  19. S

    Side Breather cover gasket

    I seem to have an oil leak from the side breather cover gasket, where the breather pipe from the rocker cover (not the cyclone) goes down and joins the cover. It has a few bolts securing it to crankcase but two of the are holding the injection pump mounting. Anyone know if it's possible to get...
  20. S

    200 tdi engine backpressure

    Had the head off and it was blowing well between 2 and 3. Skim and pressure test and all sorted. Engineer gave me a tip. Put some grease under the cylinder head bolt flanges, otherwise they "creak" and you get a false torque reading.
Back
Top