Search results

Umm somehow I seem to have doubled up on the images?

Hello peeps of the landyworld :-) Well I knew before I got my disco all bout the chassis rotting and was prepared for it, well yesterday me and my son got the landy on a ramp and had a look, the passenger side needed 3 plates but the driver side rear section was....well.... totally bodged. A...

Thanks for all the advice, I removed the egr and blanked at the egr cooler valve end and capped the vacuum off, everything came undone nicely once I found my 5mm hex key but I do have one question about unplugging the egr / vacumm modules two electrical plugs, yes or no and if yes could it...

Ah thanks I must admit i was wondering why blank off in 3 places when the first one will blank it off, I was thinking of removing everything and putting in a spare parts box but I think I will just leave in place unblanked as you say.

Ah cheers neilly, yes ineed 2 more blanks, i will get my son to make me a couple up as I have the later TD5

I got an erg blanking kit but it seems to have only come with one blanking plate, on the instructions it shows 3 of these plates are needed, have I got the wrong kit? It's on a disco 2 2003 auto.

Well ive managed to smack my rear near side bumper / fog / reverse lights, i pride myself in actually being able to drive forward and backward and not hit things but for some reason, 3 seperate bumps on that side since January , so now either replace for same or get a metal one made up, What's...

Whoops bit big those pics are lol

Disco 2 2003 alloy rim 18 inch wanted with or without tyre (Tyre size 255 55 18) Have a 16 inch rim with Michelin block Patten tread 99% 235 70 16 to swap or sell.

Cheers, I will find out tomorrow when I set off for jolly old Sussex, fingers crossed it will all be fine and dandy :-)

Thanks Brian, the snap on is also one that works to go on þhat list but I dread to think at what cost, my wife has given the thumbs up for a second hand quality one so will have look on ebay etc. The new hub wasn't brit part, my mate got it for me on his garage account, it cost about 70 quid I...

Have cleared the lights, there was one other code which is135 amd said speed input sensor or something, i wonder if that is the problem i sometimes have, as i pull away it is like in limp mode for 10 seconds then kicks in properly, only a problem when 8n heavy traffic and needing to pull out fast

Ive just had it put on a snap on gadget and it shows a 117 front right abs sensor problem, but it is a new hub and sensor so that is a bit weird

I don't have much dosh and need to get an obd reader for my disco auto, the three amegos have sprung up just before replacing front disks and pads, I hoped it was the thin disks that had caused them to come on, I tried a 30 quid reader and also one a local motor factor had but neither showed any...

Looking for an 18 inch rim for disco 2 for a spare

Sorry wrong topic so I edited post can someone delete for me please

Actually I will do door first as it will be quicker and more sensible as I have a car to get around

Thank you when I actually get a few hours spare I will do that, my first job is to clean and reseal the xyz switch or stay in limp mode

Oaky doaky will do asap I went and ran out of fuel earlier, got some filled up started disco and door latch started working again, I will replace the actuator though. Thanks