Search results

right drove it for 30 miles today and finaly went into limp home mode with fault code P0234-00 any more ideas ???????

surely the tbhousing would come up on the obd ? no ?

hi strange noise when you let off the throttle at 2000 rpm sounds like a kids dump valve going off and when it does it puffs out grey smoke ???? any ideas lads ???

thanks just as i thought !

2007 2.2 freelander whats the point of the fuel pump in the fuel tank ??? as it dont prime the system ???

No only vibrates when under load but when you stop in drive then put foot on brakes and put in park it stops rattling

I can't but then any second hand one is a gamble and all I'm asking is if anyone has had a problem with a tc and what noise if any did it make?

right this is my problem i got the car with a broken flex plate and that in turn had broken the torque converter i got a second hand converter and the car was fine for first 50 miles then started vibrating and also makes a rattle noise that stops when you turn the steering wheel now the new...

hi got a vibration in the centre of the car at 1500 2000 rpm seams unde the handbrake lever area ?? any ideas of the problem ??

Vibration noise at 1500 2000 rpm in the centre of the car it's only done 40000 any ideas??

thanks for all your directions and help mate

it was the drive plate !!!!

but i have hurd the drive plate can break up ? anyone hurd of this if so what sort of noise does it make ??

hi col its auto mate

if an injector had failed why would it correct its self at high reves ? and noise is to heavy for derv prem knock and its sounds like the sump unless its echoing thro the sump ? can the balance box be timed up ok with the auto gearbox in situ ? thanks for answering all my stupid questions but...

if it was a faulty injector surely it would throw up a fault code or even anti knock sensor would throw a code up but nothing !

ive got no choice ill have to pull balence shaft box off , can it be re timed with auto box still attached ?

thing is car has only been serviced by lr and no other work done at all and all the noise is coming from balance box area ???

ive been told swirl flaps are known to break off and go thro rare but happens but i would guess that would destroy engine ?

i used 2k for 10 years without a mask no problems at all , thats base and clear and sikens primer