Search results

Found this in a td5 forum and just asking wouldn’t it start without the high pressure running? Is there not a high pressure reading from from the regulator

Will a nanocom do the same?

Waste gate is not stuck I’ll try the fuse tomorrow.

It goes well on the flat and about town, motorways and uphill it seems to stuggle the when the injection loom was faulty. Egr is gone. I unplugged the maf last week when it started and I thought It was worse. I will try and test it tomorrow. Fuel filter change has been done today.

Hello you knowledgeable lot. I have a 2003 discovery 2. Last weekend it started to judder and there was a severe loss of power, But before I got home the juddering stop and power up to about 2500 revs came back. It travels about town ok but hills an motorways are a struggle. I have checked...

Penygraig Tonypandy here

Not an easy job by any means. Taking it off is easy. Getting the block back on with gasket is a . Torqueing it up wasn’t easy either. Just remember to take a photo before you start. Prepare yourself by watching you tube and it won’t be such a bad job. You will get the minor details, but will...

no it wasn't leaking but a decision i made after the hose from the regulator to the front corner of the engine decided to leak and empty the tank.

While dodging the showers i changed the fuel pressure regulator and associated o rings and gaskets,what a horrible job... Tomorrow I am heading into the head to change injector seals and o rings due to a raised oil level in the sump.

Thank you for your input and support. Hopefully after new oil cooler gasket oil filter gasker new o ring, new turbo oil feed pipe with copper washers I think I have cured the major oil leak. Hope to sort the others soon.

It has been stripped down to the oil cooler since so no, no two seals are I did change the centrifugal filter but both bolts wer Latest up date. Tonight I purchased a new filter bolted turbo back on. Topped up the oil and leak has moved to the turbo oil feed pipe.

I am at my wits end. It is a discovery 2 td5 with 134k mileage and after I changed the oil filter it is now getting worse, I have changed the oil filter housing gasket and the oil cooler gasket and o ring. but it is still dripping down the side of the filter. So now I think there's a deeper...

Evening all Tonight’s dilemma is locking the discovery. I don’t have fob so always lock by key, so turn it left once to lock drivers door and once more and hold to lock the rest. Not today. Drivers door locked but no response on the rest. So i lock the rest from inside and then lock drivers...

After an oil and filter change i now have an oil leak from the oil filter housing water /oil cooler. I am in the planning stages of what I need oil filter housing gasket oil / water housing m22 doughty washers 2 o rings sizes unknown any body help Have i missed something

It’s not a bad job once you have done one!!! But get your drift thanks.

i have tried all of those but awaiting a reply off a fellow ebayer.

I am in desperate need of one of these. I assumed I had one and run out of time to go get one. Does someone have one of these seals, DISCOVERY 1 2 R380 5 SPEED MANUAL GEARBOX OUTPUT SEAL FTC500010 in the south wales area. Thanks for looking

Thanks Brian you have been a great help.