Search results

I got one of these about a year ago, it fits into your standard Defender interior light and I can't fault it for the price..... https://www.ebay.co.uk/itm/White-1210-SMD-48-LED-Car-Interior-Dome-Light-Panel-w-T10-BA9S-Festoon-W2M5/232781762445?epid=1150177319&hash=item3632dfcf8d:g:RtoAAOSw3bxbCBH7

I had that 'clunk' and a bit of vibration from 35-50ish. Went underneath and could feel, and see that the rearward UJ of front prop was worn. Got replacement GKN joint and took off the prop. I then noticed that, even though there was no play in the other joint, it was a little stiff at certain...

2001 TD5 Hardtop, there is a 'Factory' striker fitted below the check strap.....

Someone more knowledgeable will be along but I'd guess Silicone Spray might be more suitable.....

My switch is damaged so I'm trying to replace it in the general overhaul of things. I thought I might as well get a switch for the console rather than putting it back at my right knee. I've already moved the Hazards 'cause they were in the same place. I think I'll try fit a momentary switch, I...

Ha, it's a 2001 Hardtop, and a fairly basic model.

Yep, it stays on 'till you press the switch again, which cancels it. Plus when you turn off the ignition it resets the fog light to a 'default' off.....

I did a bit of exploring on the existing switch. Two wires connected. One is an earth feed. Press the switch and it 'pulses' the earth out to a relay I can hear clicking behind the steering wheel. Press it again and the earth 'pulse' switches off the relay.....

I'm trying to move my Rear Foglight Switch up from my right knee to a centre console on a TD5 110. I've bought an RDX K Switch, https://www.ebay.co.uk/itm/RDX-K-Rear-Fog-lamp-light-Switch-OFF-ON-Defender-110-Dashboard-Console-Kit-Car-/360649857756 This is a rocker switch, it's either on or off...

I see Harry even has his cows numbered as Land Rovers!.....

I trimmed them level with a sharp Stanley. Drilled a small pilot hole and used black Drywall screws. Snip the screw with a pliers to about 5 threads or so. Most important is not to go through the card and appear out on the 'good' side.....

@Barbados Hi, did you make any headway with this after? Interested in doing similar to a 2001 TD5.....

From 1st post.....

http://www.paddockspares.com/amr3025-front-washer-jet-from-aa270228.html https://www.johncraddockltd.co.uk/land-rover-defender/defender-90-and-110/parts/washers-and-wipers/amr3025-screen-washer-jet-90110.html

Assembled in reverse order!..... I soldered my tails onto the connectors feeding the panel, I couldn't get the pins out so just spliced them to the appropriate wires. And I now have a "Side Lights" illumination on the dash. It's a different green to the 'Flashers' but that's no problem. And...

So I fixed the problem in a roundabout way. I ordered green 12v Leds from my friend in China who put them on a slow boat for me. I tested them on a battery and they're very bright so I had to come up with some way to 'dull' them down a bit. Light Panel..... The Leds are 3mm. If I drilled a...

It's not a Hi Lift but might give you some idea.....

Fuse 16 seems to be your problem, check that you have power on both sides, the contacts can get a bit 'dirty' at times.....