Hi Chaps. .busy place here.... Online antidepressants just round the corner. ..
Replacing rear discs , pads, sensor ,..by my LFG...but their Bosch. Diag. Machine can't reset the warning light, and remains on ..
Any ideas , chaps ☣??
Caio.
Haggis.
Yes ..I've developed a gyro mount for my Rega Planar 3 turntable on the dash.
Visibility still ok. Will post pictures and install details soon.
( plays 45's as well )
Haggis Shooter.
Hi Chaps ...my 'New 2011 TDV8 4.4 drivers seat belt spring has lost it's mojo ...just won't spring back up 9 times out of 10 ...however it's not that old , so maybe just needs a lube e.g. wd40 , KY jelly ?..or replace. Any good vids on
YouTube etc. ??? To describe access method ?
Cheers
Scott.
Yeah...thanks !!! For that. For your extreme humour I'll send you one .. it's in the Freezer.typo on TD6 obv.
However ...back to the question ...any comments.
Cheers.
Scott , Gamekeeper.
Hi Folks.
PLEASE see my previous post re. EAS reset etc. Been looking at Foxwell ND 510 , AND iCarsoft i930...any advice please. For L322 2005 tdv6. , and 2011 TDV8 4.4
Need to reset EAS warning message on former. .
HAGGIS in the post for any advice , once shot, of course!!
Cheers
Scott.
Hi Folks ..could you Geniuses give me a clue as to whether to buy a diag. / reset tool for 2005 L322 3.0 tdv6, and my new 2010 4.4tdv8 ????
I have to reset the EAS on the former.
Did a bit of Interpooing ..and seen Nanocom , but mainly iCarsoft i930 , and Foxwell ND 510. ANY Ideas ?.
Very...
Hi Guys.
THANK you.
're. The above ...can exclude wipers, and I've had fan heater in both rear quarters..fuses in and out. So maybe not this.
As for the LCM ..what does it look like ? Where ? Ok,I'll apply heat and Roger it a bit , sensitively.
The RESISTOR and DIODE PACK ...i don't have a...
Hello again Comedians. Despite being Scottish, I'll be brief.
Have been away for a bit longer than expected on one of Virgin Skylantic Space Flights. Couple of Rangies up there.
Ok ..replaced Sat nav/ CD BMW model ..flipping tricky ..don't do it.
ALL GOOD.
Air susp ..Still inactive ...did the...
Well done , Saint...I just did exactly the same job on my new 4.4TD ..bit of a bar-steward of a job..as usual , easy to remove , ..the end difficult. You have to put the top metal trim in Last !!optional swearing ..some good YouTube videos.
Hi Folks
It is somewhat gratifying that there are still some Comics out there !!...I like the 5th November Idea .Thanks for the clues.....Codes will have to be re-read again
RRKev..you seem to be the only Adult here ! ,...... heater Final Stage Resistor ???...what/ Where ...