Search results

Precisely why I let the plumber fit my new stopcock. 🤣 🤣 🤣 Do we assume that the in house stop cock wouldn't isolate your garden tap? :(

Glad you had fun!

Did you not undo the gland nut a bit to ease it? 🤣

Depending on how much I'd have to do to get it back together the Dolly Sprint box would be worth money, it might even be worth summat as it is. Pinto stuff is always worth dosh, I have a complete engine including ancillaries, a 4 speed box and another head. Other bits of B series engines, etc...

It is probably due to the sump flange not being completely flat. This tends to happen when people overtighten the bolts and warp it a tad. If you take it off to hammer it completely flat then you will have the opportunity to see where the oil is coming from.

Just been to Poole to buy my combined Xmas and Bday pressy, a new pooter. Couldn't find the one I had chosen, on Curry's website. Eventually, very eventually, managed to speak to a blokey who found me what I was looking for, more or less. So came home and ordered it online. Will have to go back...

and did you find the stop cock?:):):)

Arternoon all. Grey and windy here. Have a nice day! :):):)

You are not the only one. At least W tends not to set foot in the garage so I can at least hang onto stuff that otherwise I might have to get rid of. I've got a 4 speed Cortina gearbox, if that is any use?! 🤣 🤣 Or a rather suspect Dolmite Sprint MOD one. (Stored outside with no ATF in for...

The bobweights are to be found under the plate in the distributor, they are sprung so that they stay close to the centre of the distributor under low revs but once the engine revs higher the bobweights move outwards under centrifugal force and move the top part of the spindle so that the spark...

Tis a shame you haven't got a known good'un lying around. I can see new tranny costing almost as much as wot you paid for it. Bit of a shame, sympathies Mate.:(

Ah, yes, I remember you talking about getting the grinder out!!

You don't fancy a bit of second-hand then?

:rolleyes: :rolleyes: :rolleyes:

In what? that Orange thing? :eek: :eek: :eek:

If you just hammer it down with a socket, you know you are not expanding it beyond its failure point, if you use the screwdriver technique you will be expanding the top of it more than the bottom and the bottom is what needs to expand as the terminals are slightly conical. Or do you expand it...

It could be anything! If all the electrics in your car work then I wouldn't worry about it!

The bolting it up isn't the problem!

I've just had a butchers on line. Wasn't expecting summat you put on with a mastic gun! Nevertheless may well be worth a try. Ta Mate!

I've just checked and I can more or less check rdaily consumpetion via Octopus energy online. Funny how our gas consumption has dropped to zero! not so funny re the electric tho!