Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. rover75lover

    SRS Light

    obd connector has been replaced with one off a vw /audi well that's what it says on the side of it . I have a bundle of yellow wires coming off it all having been spliced into the original rr wiring!!! would any one have an obd wiring pin connection to what coloured wire its connected?
  2. rover75lover

    SRS Light

    Thanks Datatek. I've tried key in,still the same,ignition on,still the same ,engine running still the same all tried with the doors shut. Thinking of trying to "chase" the wires from the obd connector to the airbag ecu to see if I get any connectivity,sorry my smelling (spelling) isn't too...
  3. rover75lover

    SRS Light

    Hi my N plate p38 manual diesel has the srs light on solidly Ive checked and replaced one of the srs bulbs light is still on. Ive attatched my nanacoom and it says cannot establish communications with ecu. Ive taken the yellow ecu box out and swapped it for another ,with the same results...
  4. rover75lover

    p38,airbag,nanocom

    Third time of posting but it doesn't seem to accept it ,so if there comes three of my posts back to back BIG APOLOGIES Got a 95 p 38 diesel manual RR Goes well but got a mot coming up and my srs light is dimly lit and I have air bag fault displayed. Bite the bullet and bought a nanocom ...
  5. rover75lover

    engine removal

    Sorry to bother everyone but im taking the engine out of my 1995 rangerover manual. If I pump the suspension up,block it so it stays up can I remove the engine only,i.e. without the gearbox etc. I have a jcb teleporter so lifting it isn't a problem.
  6. rover75lover

    head gasket fip timing

    ta,thanks for all the help,will report back thank goodness I bought myself a four post car ramp!!!!!!!!!! ok ok second hand but its in and works
  7. rover75lover

    head gasket fip timing

    btw ,how does one check the timing chains please?
  8. rover75lover

    head gasket fip timing

    starts runs no problem ,soon as I take it on the road up goes the temperature into the red cant hold it even with heaters full on. new thermostat,new waterpump,new viscous,new rad still over heats so biting the bullet and checking the head for obvious cracks etc,if still no good,ill drop...
  9. rover75lover

    head gasket fip timing

    building up steam to do the head gasket/head off on my 95 diesel manual. Now the question id like to pose is, if you were me i.e doing the head gasket would you check the fuel injection pump timing as your almost halfway there so to speak after you've replaced the gasket but before trying to...
  10. rover75lover

    blak box solutions,codes etc

    thinking of buying the blackbox solutions for my p 38 diesel 1996. Will the box also be able to give the emergency access code as well as I bought her second hand and don't have the code
  11. rover75lover

    head gasket change

    going to take the head of my 1995 diesel p38 hopefully on the weekend. In the rave handbook,manual it says something that if the motor has covered more than 13,000 miles to insert feeler gauges on the inlet side of the head. I cant quite understand what s meant by this,could anyone enlighten me...
  12. rover75lover

    eas pump woes,help plz

    cured looks like the eas valve block o ring overhaul did the trick. my bouncy little lady is back to normal,rises up settles and whey hey the compressor shuts off and stays off will have to look for somewhere else now to fry my eggs, thanks to all who helped out
  13. rover75lover

    eas pump woes,help plz

    my bonnet switch has been bypassed by someone before I had the motor. I changed the o rings,diaphram today. To late to check it tonight so will report back tomorrow.
  14. rover75lover

    eas pump woes,help plz

    many thanks,reading other posts on here does that mean I need to do an eas valve block,seal oring rebuild? thanks again for the reply:)
  15. rover75lover

    eas pump woes,help plz

    ive a p 38 1996 diesel auto. lately the eas pump has been running a lot,every 10 seconds when stood idling ,doors,tailgte etc all closed. I know as the bushes on the eas are worn and ii can hear it rattling. Two days ago she sat on her stops ant the 35 mph slow,christmas tree lights etc...
  16. rover75lover

    diff lock,auto,1996

    Probably my lack of knowledge,commonly known as ignorance but does my 1996 diesel auto have locking differentials for off road? If so how does one engage them,it? many thanks
  17. rover75lover

    New aircon condenser needed . . .

    Yep bought mine of him as well,most helpful,cost me more money but as mine had been holed for so long he told me to buy a new drier(as the old one would be full of water/moisture) and a new thermostatic valve as these stick after having water in them for so long. Great service,great...
  18. rover75lover

    Radiator advice

    the guy on the auction site trades as budget-radiators
  19. rover75lover

    Range rover p38

    Go with dataleks advice and disconnect the aerial wire off the rf unit asap. Mine burnt the door locks out before i took the advice off here. If it helps ,my p 38 was great in work,I travel a lot but every morning she had no battery life,changed the battery,same problem,had the alternnaator...
  20. rover75lover

    Radiator advice

    I just changed one on my p38 diesel. I used the same place as i changed one on my p38 manual back in october They work great and cured my auto from sitting at 2 oclock all the time,she hits 12 and drops down a little thats come motorway driving and standing in a traffic jam at 23 degrees for...
Back
Top