Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. philpremo

    new master cylinder fiited

    i did not change the clutch it was only replaced a year before i bought the car i changed both the slave a LUK one and the master both from europarts does not high rev or no clutch slipping when driving the pedal as always been low but now i need to pump no fluid in engine area i can see
  2. philpremo

    new master cylinder fiited

    help i need to bleed my clutch is it a simple job or a garage i changed the LUK slave last year so hopefully its not popped again Anu advice will be grateful
  3. philpremo

    newbie wanting some help

    hi put your reg number into europarts and click service items all there including the oil the oil breather to the back of the engine will need doing too and change the turbo breather as well thats at the back you can get to it via the front wheel arch ant more help just ask no special tools needed
  4. philpremo

    help bonnet cable snapped

    anybody in the hull area who can help me open my bonnet i would very much appreciate, popped the rivets but need help ,the cable has snapped inside the bonnet and mot due soon i have a freelander 1 td4
  5. philpremo

    new member..freelander1 td4

    hi and welcome same freelander as mine
  6. philpremo

    HELP my td4 bonnet cable has snapped anyone got any ideas to open need someone to help open it

    HELP my td4 bonnet cable has snapped anyone got any ideas to open need someone to help open it
  7. philpremo

    hello everyone

    hello imnew to the forum but would like a couple of hours help removing my td4 2.0 diesel manual gearbox
  8. philpremo

    help needed please

    hi im new to this and just got a freelander td4 but the slave drive is leaking so i thought i would change myself easy so i thought got up on axle stands nearside wheel off drive shaft out oil in both boxes drained all but 1 bolt in gearbox out near the ird and now im climbing the wall i need a...
  9. philpremo

    help needed please

    hi im new to this and just got a freelander td4 but the slave drive is leaking so i thought i would change myself easy so i thought got up on axle stands nearside wheel off drive shaft out oil in both boxes drained all but 1 bolt in gearbox out near the ird and now im climbing the wall i need a...
Back
Top