Search results

Thanks mate. Glad to be of some help 👍

That's great, thanks buddy. Nice job.

How did you do it where it meets? Repair the inside then the outside and weld just the underside? If you know what I mean?

So I found out I had water ingress into the passenger footwell! It was quite a substantial amount of water. Immediately I stripped the fully sodden carpet out, so that's the seat and centre console out too. The carpet took 1.5 weeks to fully dry out. Once it was all stripped, dried and cleaned I...

New wheel bearing fitted and after that I did a 4 wheel alignment. Before During After

Got a few updates here. Been a bit slack updating the site. First up is new high power LED reverse light bulbs from 20Twenty. https://www.autobulbsdirect.co.uk/382-twenty20-cree-led-12v-p21w-canbus-bayonet-bulb.html Added a Victon Smart MPPT solar charger to my auxiliary power setup...

That's good to know. Thanks. Will get one ordered.

Only britpart ones @£200 though!

Did anyone have success in refurbishing these yet?

Spent all day yesterday cleaning the underneath and exterior ready for the yearly lanoguard treatment.

Upgraded my wiring and fuse holder for the LPG. Before After

Use this mate... https://www.ebay.co.uk/itm/112135504332

Upgraded my battery to lithium.

Fitted a new reducer and got it professionally mapped on LPG.

Added a low voltage flashing led/buzzer. And a fast usb charger.

Thanks mate.

Been really busy with the aux power system in the landy. Its all up and running now, just need to add my 12v accessories, fridge etc. My negative main battery terminal was worn so I installed a high quality replacement and crimped a new lug on the existing cable. Ran the dc to dc cable in...

Started running the dc to dc charger cable and found a wet drivers footwell. Found the culprit so stripped it back, cleaned it, treated it with rust converter/sealer, 2 coats of chassis paint and applied Sikaflex 221 sealant. Also found some rust in my boot floor under my aux battery. So I...

Here's a pic of the finished mount with the battery installed. Also one with my fridge strapped down ready for Billing!

So I've made a start on my aux power system. I've bought a 130ah AGM battery and made a mount for it using stainless and aluminium. It's supported from underneath buy a long m10 stainless bolt with a custom made foot. The battery will be secured by a tie down strap.