Search results

Does this pipe need replacing does it reset it's self? Sorry for all questions just doing my head in now is this problem

Can you talk me through it please is the pipe rubber? Where abouts will it be. And what do I do once removed it ?

How would I go about doing that please very new to it all

Was starting to wounder if it was master cylinder not pulling back as it should. Abs would keep on all the time? Freewheeling is no problem which is the annoying thing. The car shakes after a while but this is the same time the discs get hot but brand new discs and pads new hoses and new Pistons...

Yeah it's both sides

Have put new disc pads and hoses on the car after about 35/40 mins starts to shake the car and discs get stupidly hot still. What is next move ?

Thanks for that will re do calipers as cleaning then since I'm doing the discs see if that helps if that don't clear the problem will do the hoses the pistons are new as replaced then so will see what happens from there. Not that I'm against hoses all for it just want locate the problem by...

Right discs?? What else could be on but freelander ones they are vented ones. I've bought correct ones now so will see

They are stupidly hot. After 40 miles with not much breaking to my home town if you spit on them it fizzs after a few Mile they to hot to touch. Every other car I have owned has been they have been cool all the time unless it been hammered. The discs aren't glowing but still something is...

Hoses are next on the list to do could it be slight buckle in the disc causing the issue ? The mud shield was hot today as well can you get away with not having them on?

Both are getting to be same amount of heat in then. Been told to sharply break and see if car moves off being pushed by hand which it does so this is supposed to determine if hose have collapsed. Fresh discs are going in this coming week with new pads. Everything seemed normal when bleeding the...

Hi all Getting issue with front breaks getting stupidly hot on short runs. I've changed the slide pins Changed caliper pistons and seals Bleed the breaks getting better but not great there seems to be no binding but slight rub from the disc on the pads now would this put a lot of heat in to...

Was toying with the idea of spraying it Matt black to have a contrast between them both to it would look well at the same time

Cheers guys shall have a look just me being picky just want her to look nice

Hi all just woundering I have the 3dr in black and the removable roof has fraded to a gray. I know it's cosmetic but was thinking of using simmonz back to black on it or have people used something better?? Cheers Mitch

Had the vcu out done bench test they have been over her very strictly. I could not ask for a better service.

Well heard back today about the freelander and ird vcu and rear diff all in perfect working order had gear and ird oil changed no bits in it they have but it down to break sticking on and the traction control nipping on which cause the knocking sound on round about. They have sorted breaks taken...

Was good couple of inch wobble and its was the shaking u was considered about most sort of learning on the go with this all but no noise if there was noise would have gone and got the wrecker to pic it up

There was no noise which has confused me. Smooth gear changed no clunking on or off Accelerator just the wobbling gear stick and slight knocking when I corner. Limped it back home. Get the dredged phone call tomorrow to say what is wrong. For what i paid for the old girl I'm still quids in if...