Search results

Wheel Alignment. The 110Posted by Nicky Smith Fri, November 18, 2016 16:38:31 After feeling sorry for myself for a while after realising that I was going to have to make some structural alterations to the passenger foot well so the 200tdi's exhaust does not hit it constantly I wandered back...

Oh I am way too far into this project to walk away from the bugger now! Its not a big modification, I just need to move one corner back about 30mm. After what I have been through with this I don't worry anymore! I just walk away and do one of the many "house" jobs that are on the list ;)

It's supposed to be the proper conversion pipe kit that costs a bloody fortune! It doesnt need much cutting and shutting on the foot well just a bit of a pain!

Tow bars & Technicalities. The 110 Posted by Nicky Smith Fri, November 18, 2016 13:00:06 Isn't life a strange thing. You head off in one direction thinking that a small job will take no time at all but within moments of starting you realise that now it's going to head off in a completely...

Steering Boxes & Seats. The 110Posted by Nicky Smith Thu, November 17, 2016 10:51:58 As you can all see from my delays in writing anything I have been more than a little busy of late with life in general as well as family illness including my own, that bug that's doing the rounds is a doozy...

I will get my coat...

Great stuff I will go with the tdi exhaust ;)

LMAO really! It's a genuine question from my part. I don't know if choosing either type would effect the engines general performance! The 2.5 na exhaust would just hang right back in place I was just wondering if it would be ok to use ;)

Ok then I have fitted a 200tdi into my old "D" reg 110. It's a Discovery 200tdi and I have the conversion bit from the manifold already. So what exhaust should I buy? Do I buy the full 110 200tdi one or put back on a 2.5 system with both needing a bit of modding to make them par up at the...

I did ponder about just leaving it as it was. There is a great deal of conflicting advice on it so in the end I decided that the best thing to do was to chuck it to "Factory spec"

I am going to focus on one thing and step by step i shall get there ;) Nothing worse than lots of "ongoing" jobs!

Propshafts Revisited. The 110 Posted by Nicky Smith Fri, November 04, 2016 13:02:29 Well I am a man who is happy to put his hands up and admit when I got it wrong. And I did get it wrong. When i refitted the rear propshaft yesterday I put the damned thing on the wrong way round and to say I got...

Propshafts & Parcels. The 110 Posted by Nicky Smith Thu, November 03, 2016 19:16:50 It has been an interesting sort of few days. The Disco has gone which has left me to focus just upon the 110 which is a good thing really. You see I have been stretching myself rather on the thin side. The...

I am looking for a set of wheels and tyres to fit a Discovery 1 with a 2" lift in the Nottingham Derby area. Don't want to spend a fortune so what have you good folks got?

Crossmembers & Weeping The 110 Posted by Nicky Smith Tue, November 01, 2016 09:05:31 Being a father to four kids I am not easily surprised these days to see one of them sporting the latest trend in fashion or head wear styling. I have learnt over the years to keep my inner thoughts to myself so...

I really dont have enough time to strip it all down if i am honest. So it will be advertised as is and see what I can get for it!

Cheers Rich :) If I had a trailer that would be ideal but unfortunately I don't. Soooo I think I will have to go down the flog the whole thing route :(

Hello stranger :) I would just take bits off as they sold if i strip it. It can sit in the corner of the driveway that way!

Thinking of pulling it apart...

The Discovery's Dying. The Discovery Project...Posted by Nicky Smith Mon, October 24, 2016 15:53:44 Today I found myself running the Dad errand of taking my youngest daughter to her first job interview. Seeing as the old Disco that has been sat for a week that was my chariot of choice for this...