Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. xpuser8334

    Freelander 1 What a Bollxxx to drop??? SDD & Mongoose no good for FL1 :-(

    Apparently...... and only apparently..... the Ford VCM IDS should work..... I tried this and I can confirm that:- a) either (again) i have the incorrect software b) again it's b4lls. However..... interestingly enough..... My Genuine Ross-Tech VCDS (VAG) Software and Cable reads the codes and...
  2. xpuser8334

    Help!! Bonnet, drive belt, heater!! Hat trick

    Nathan, not knowing what engine you have.... In my TD4 the water pump is driven by the multi-ribbed belt - if this has gone, the water won't circulate to the heater matrix (internal radiator for heat) - it also won't circulate water anywhere else, so it's not a good idea to run the car to...
  3. xpuser8334

    Freelander 1 What a Bollxxx to drop??? SDD & Mongoose no good for FL1 :-(

    After Paying top dollar for the genuine DrewTech JLR Mongoose cable to use on my OWN car(s)...... Used it on other cars in the Family and Friends Circle before I got the Freebie online.... Jags.... yup. RangeRover Sport - Yup... Disco - Yup... Freelander 2 Yup..... My Freelander 1 (2003 TD4) -...
  4. xpuser8334

    Freelander 1 Carpets for 3 Door Freelander 1 - are they the same as a 5 door??

    ok... thanks.... I'm looking for a front set of carpets in black for a 3 door FL1 if anyone is breaking a car??
  5. xpuser8334

    Freelander 1 Carpets for 3 Door Freelander 1 - are they the same as a 5 door??

    I'm looking for a set of carpets to replace the one's in the 3door, two seater SUV Freelander 1. Is this a specific set of carpets, or will any fit??? I don't mind cutting it where the "backseats" would have gone - or laying the carpet as a full piece!! Any Advice Gratefully appreciated...
  6. xpuser8334

    Mixed Feelings...... The Freebie is running, but dad didn't see me do it.. - hopefully he's...

    Mixed Feelings...... The Freebie is running, but dad didn't see me do it.. - hopefully he's looking down on me and being proud of me.
  7. xpuser8334

    Please Help... What's Missing [PARTIALLY SOLVED]

    @Alibro sadly, he will probably be looking down on it from above...... He passed away on the 8th October - hence the big gap in getting around to finishing it off. But I'm confident that he would be happy and proud of me doing it properly though..
  8. xpuser8334

    And being originally from Wombwell.... I could have had it recovered too!

    And being originally from Wombwell.... I could have had it recovered too!
  9. xpuser8334

    Wish I had known earlier :-( but sadly, the old gal my dad gave me has taken all of my finances...

    Wish I had known earlier :-( but sadly, the old gal my dad gave me has taken all of my finances to get on the road. AND... I "STILL" need bits to finish it off... I'm happy to pay some sort of donation, but sadly, i think you will want to get at least a couple of hundred for it.... (I hope my...
  10. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    That is very kind of you...thank you so much....the problem though..I spoke to the guy and told him I wanted the full car to strip. He said ok and agreed to deliver it. He rang me back an hour latet and said he had a buyer for the engine and box, but for a deposit; he would keep the car whole...
  11. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    Its not a problem... either way.. the guy wasnt there and neither was the car..
  12. xpuser8334

    Please Help... What's Missing [PARTIALLY SOLVED]

    @GrumpyGel Yes Pal..... at the moment (until something breaks - as something always will) I'm feeling that I have done my Dad proud.
  13. xpuser8334

    Freelander 1 [SOLVED] Anti-Roll Bar Off when droppingTD4 Engine? Instructions added.

    While I had all of the above stripped off, Taking Dave's advice.... i replaced the ARB Bushed changed the drop links replaced the wishbones fitted new driveshafts (only britpart ones though) replaced gear linkage I also had the opportunity to replace all of the brake lines - but they were...
  14. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    Already been through that... I have all of his details - and given up pursuing the money... just be careful when dealing with this guy.. he apparently has a brother.... his name is dean and his brother is called David.
  15. xpuser8334

    Propshafts missing and few other problems

    Sorry... I was referring to "i would be back on his doorstep with a mate or 6!" - with the "me too!" comment.
  16. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    anyway.... before paying anyone with this surname in Rochdale..... PM me and I will confirm the details against the ones you have.
  17. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    @blue beasty - i think you can release the post.... based on the above
  18. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    Yes LandyMan.... imagine how pi55ed off I was when they said the value wasnt high enough to pursue.... to the point, the legal fee surrounding the recovery would be into thousands... I was told "they will keep the information on file - pending him being caught for a higher value crime...... what...
  19. xpuser8334

    Freelander 1 Right... I'm not scrapping it... I will bring live back into her...

    no problem moderating it... the police ended up saying because the value is so low they won't pursue things further.
Back
Top