Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Rubins4

    Series 3 109 Rebuild

    Good work. If you get a second hand chassis you will have to bring the identity of the second hand vehicle with you, effectively making your vehicle the donor. If I were you, and at the point that you are at, I'd just get a new galvanized chassis for it. It's an expense but you won't gave the...
  2. Rubins4

    Stupidly done it again

    Pictures Bob, pictures. :D
  3. Rubins4

    Another part I don't know where it goes.

    Looks a bit like a bit that goes up the back of the bulkhead behind the seats to attach the spare to. Might not be, though.
  4. Rubins4

    Series 3 swap gearbox

    @Brian Waterman If you speak to Ashcroft about their high ratio conversion I'd be interested to hear what they say, costs, availability etc... Ta.
  5. Rubins4

    Why bother?

    The performance head doesn't alter the camshaft, so provided a powerplus camshaft is sensible I can't see how it would hurt. This is only so much point in trying to make a slow car fast, however.
  6. Rubins4

    Why bother?

    Performance head from Turner or ACR if they do them; also get the benefit of unleaded value seats and new valve stem seals.
  7. Rubins4

    Series 3 Engine Serial Numbers

    Awesome, if Queenie owned it it must be worth a fortune! :eek: Scotland Yard can have it back over my dead body :D
  8. Rubins4

    Series 3 Engine Serial Numbers

    I think what you say is correct for some engines but not the 2.25 petrol / diesel engines. My V5 and block show 9 digits being 8 numbers then one letter, which tallies with what glencoyne say in their link previously referred to.:)
  9. Rubins4

    Series 3 Engine Serial Numbers

    Wouldn't get much conversation going on here though would it it? Neither has this thread, mind. I'll have a look in the morning ;)
  10. Rubins4

    Series 3 Engine Serial Numbers

    I'm trying to read the searial number off my block for insurance purposes, I know where it is and how many digits it should be from Glencoyne's very helpful website http://www.glencoyne.co.uk/engno.htm; what I dont know is whether the final digit is meant to be a letter or a number, mines not...
  11. Rubins4

    Paint codes

    I didn't say it was cheap, I said it was the right colour :p Perhaps that's why you're buying two different versions of the same thing :D
  12. Rubins4

    Paint codes

    Try this lot... http://www.autopaintsbrighton.com/land-rover-classic--vintage-car-paint-cellulose-codes--colours-636-p.asp I've had marine blue and limestone (the cream colour) and been satisfied with the match.
  13. Rubins4

    Poly Bushes Ruined My Land Rover.

    How can it be clamped and free to rotate? If it's clamped, the bush rotates around it, shirley?
  14. Rubins4

    Poly Bushes Ruined My Land Rover.

    Isn't the idea the plastic slides around the steel tube, which is clamped tight between the shackles?
  15. Rubins4

    SWB re-chassis

    The battery is old but passed a proper battery check not so long ago. I could get that checked again I suppose? I know a tow start would fire him up ok. I should have dried jumping him earlier when I was there. What a numpty.
  16. Rubins4

    SWB re-chassis

    Well said @suburban ... the journey continues... Over the last few fire ups, the starter motor has been getting slower and he's harder to start. Jumping in to get him going today and I get the dreaded "click". So, I've checked the battery as best I can single handed; it was given the all clear...
  17. Rubins4

    Series 3 Rumble on part throttle

    Hi @Blackburn sorry I didn't see your reply! Thanks disappointing. Looks like it might just have to wait for a full gearbox rebuild. Think I might treat him to a high ratio conversation too (budget depending!)
  18. Rubins4

    Series 3 Side light fittings

    I fixed the wires up too, only the brake and side lights, so the side lights were brighter than the brakes. I've ordered my Lucas smoke kit but haven't fitted it yet! :D
  19. Rubins4

    Series 3 How much bleeding do brakes need?

    Christ alive... How are you supposed to get on with this sort of thing going on?!
  20. Rubins4

    Series 3 How much bleeding do brakes need?

    I fitted a reseal kit to the original master cylinder and have been ok since.
Back
Top