Search results

D1s steering only has a drag link and a track rod, the end ball joints x 4 are similar but the near side is LH thread, all have a M12 securing nut on top, castle or nylock. The rod adjusting clamps have nut & bolt but that is 1/4 unf. Anyway agreed this thread has gone off topic some what, the...

Thats correct track rod ball joints are near side LH thread offside is RH thread. Well they are on a RRc and a Disco1🙂

They do look a bit crusty don't they🙂 Anyway they are a service part and so listed in the LR Disco 1 parts catalogue. Listed is a M12 nut-tube female NRC9770 and the olive NRC 9771.

Have a look Hella Comet 500 for sale on eBay.

The lens shouldn’t be opaque as shown, dont buy ☹️ You should be able to see the bulb even in a fog lamp as link below shows. https://images.roverparts.com/1000/STC8480G-01.jpg I’m not sure now what the model number is for my driving lamps are may be 500, and been there for 27 years, fitted...

Spot lamps have a clear lens to give a long beam, fog lamps have a dense pattered lens to give the flat top beam, driving lamps also have patterned lens simple to some head lamps to give a long wider spread beam. All Hella Safari 5000 lamps are the same size.

Comma oil recommend 75 90 semi-synthetic GL5 grade in both axel diffs. https://www.commaoil.com/

My quick search🤔 may or not help. https://www.johncraddockltd.co.uk/da3023-safari-raised-air-intake-snorkel-kit-td5-and-v8-for-lrover-discovery-2-left-hand-side-fitment.html...

And the best of luck with that, much better to ask Google.

That’s about it for starters. I cant see that short length of wire that's involved would be an issue. unless you have been working in the area and dislodged the plug and its half hanging out, it’s quite a substantial plug in relation to the other plug&sockets. If so far ok then on to the next...

From the ignition switch there is three main feeds into the fuse board Position1 minor aux feed so radio and clock illumination. White and yellow for power to the board in position2 and red/white position3 only when cranking the the engine (which needs to be confirmed) as I haven't been near...

Hi. You have forgotten the model year of your 300Tdi disco, is it manual or auto? I assume that is the vehicle from your other posts. The only thing disconnecting the battery reconnecting the battery dose is you will have to re synchronise the security system by pressing the fob lock button 4...

Umm, okay halfway right. 🙂 The 18in x 1/2in wrench was purchased way back in 1988 for when I had to refit a cylinder head following the replacement of its camshaft, since then its just used on wheel nuts, so thats just once a year with the disco… and then put back on the garage wall. 😀 The...

Just a lack of engineering knowledge/skills I do up a sump drain plug finger tight and with a ring spanner just ‘nip up’ to a new copper washer. Job done. Diff drain plugs are a bit different but the skill to know when enough is enough when tightening. Much the same when I have changed spark...

The model year of your vehicle would handy. Your EFI engine has a leased 7 important sensors that will cause a misfire if faulty, there’s a diagnostic facility that can be used which should give an indication of the issue which could just be a single part, or u can carry on with item...

The info you require and more is in the Discovery 2 electrical manual, all 728 pages of it can be downloaded http://www.discovery2.co.uk/pdf_files/D2_electrical_library.pdf

A couple of top tips, if there was a problem 👍

So how does end, success?

T55 Torx. Halfords sell them or did🤔 Or in eBay at a quarter of the price.

Looks good, make a few more and put them on eBay 😀