Search results

SOLD

Thanks for the reminder! Haven't sold a vehicle in years. Updated my post above.

SOLD

I can lay normally, no bent knees! It is snug though. I'm 5"9 - I just about fit, any taller would be a bit too snug! Head to the rear and feet towards the seats with them pushed forward all the way. Foz

It's been a while since I posted an update. These updates are all quite old (and minor), but here they are nonetheless. I fitted some amber lights into my front grille - it was like they were made to fit in the gaps in the grille! I just stuck them in place with a bit of glue. Here is the...

Another small update. My indicators haven't self canceled after turning since I've owned the vehicle - I bought a new cancel ring thing about 10 months ago, which I had lost. But I found it today :) So basically, steering wheel off and this is on the underside. In the above picture you can...

You're right, I'm just being lazy (and I need to find my multimeter) - a job for another day :)

Tried to sort my gauge over this weekend - Unfortunately I cannot work out what's causing it. I've tried different sources for earth, different power sauces, direct from battery etc. Still no luck. The only thing I can think of now, is perhaps the engine earth is no good, since the sensor uses...

I forgot to mention this - I have the exact same issue myself. I haven't got to the bottom of it yet. I've tried earthing it, but it just causes it to stay at a low temperature and it doesn't move. I will have another go this weekend and let you know how I get on... Foz

Haha - like a lot of my Disco, someone has "fixed" that before by welding a plate underneath. Bit janky but it does the job for now :):)

Seat belt mount?

About 90% was just surface rust, let's not talk about the other 10%... ;)

Bit of a boring update, but an update nonetheless. Ages ago (almost a year!) I took out my passenger seat and cleaned it up and painted it, as well as the floor. I have finally got round to doing the drivers side. Drivers seat removed Cleaned up My gearbox tunnels get very hot which...

Small update, moved the cb aerial to the front bumper. Mount & quick release Mount in place Aerial cable just about reached Aerial in place Foz

Did a spot of greenlaning today - within the first couple of miles I realised I had made a mistake with the placement of my aerial. I took off the stinger piece of the aerial, and shortly after a tree ripped off the mount. I also lost a wing mirror (again) So I've decided to relocate the...

Do you have cranked radius arms?

In mine I use average oil throughout - don't buy the cheapest, but not the most expensive - however mine is not used daily. Engine I use 10w40 Gearbox I use MTF 94 Transfer box and diffs I use EP 80w90

Couple more bits today. I bought this little 100mm x 100mm x 10mm piece of steel to make some heavy duty rear bumper spacers - As the ones I bought were very thin and just bent. Old spacer So I cut this piece of steel in half and smoothed the edges Drilled some holes and used as...

Following sorting my transfer box I discovered that the rubber seal between the gearbox/outside world and me had a hole in it. Also, my diff lock switch was broken. Replacement diff lock switch fitted - New rubber seal - I was surprised that it was a genuine Land Rover part for £15 quid...

The guy never got back to me regarding my transfer box leaking because of the input seal - so I decided to have a go myself. I say myself, my dad helped a lot, and let me use his workshop. We found the issue - notice something missing? The input seal is not there. We found it, just inside...