Search results

ok, so what i see only is to focus on AMP HOUR as the main indicator - so for a 200TDI discovery fit onto a Defender?

The brand available here are limited - how do i recognise if a battery is good or not if the brand is not that well known? I will be here in Africa so not sure the CCA would be that important - which is the key info i need to look out for in the battery to identify the one most suited besides...

starting battery :)

Hi all, I am in Ghana and my current 17 plates battery finally left me! So I am in the lookout for another battery and want to ensure to get one that will be fine for Wheely that I am prepping for my overland across Africa - i won't fit a winch but some LED lights both inside (camperised) and...

Great! thanks a lot!

ok easy enough, so i can just get a welder hereto cut and weld I guess the hole forms because of the acid of the battery? any material that should be put in the battery box to avoid the acid from messing around? thanks a lot

Hi Guys, My battery box is having a hole in the battery-box - nothing major - is it possible to fix it in a simple way in your opinion or need to change it with one of the YRM pieces? Thanks! Simone

as this: https://goo.gl/images/Yr4wKD If mine are, fingers crossed, still in good condition, shall i put some grease on the teeth for ongoing protection?

ok, do these have to be sharp or how would I recognise their condition/status?:oops:

which are the part number of the ones I didn't mention and you suggest doing?

these: 1x ftc4939 (transfer box output seal) 1 frc2464 (washer felt transfer box rear) 4 x frc3602

ok, what's the risk of using it like this? As I am changing this then, anything else that would be worth looking at/replacing?

better in this pic?

rear flanges rarely wear has yours --> by this means that mine is good and I can leave it or that rarely a flange has weared off like mine hence I gotta change it? :)

mehn that was fast! 1) you think I should replace the rear flange given the condition of mine? 2) I must have misunderstood the bearings then - anyway, worth replacing them just to be sure since I was having some leaking or if the mechanic says they are fine I should just let them be? 3) worth...

Heya, This weekend i progressed with this work - but had a few challenges: 1) I tried changing also the transfer box oil seal, flange, etc - as indicated earlier in this thread. However the flange that is fitted on my landy has 2 screws on the side besides the 4 bolts - pic attached - and the...

this is the previous ones - is it so bad like the mechanic says?

great thanks - always my saver :) ! I need to change the anterior-right one - do i need to also change the one on the left hand-side or can I keep that until it also spoils? cheers!

ok i will, thanks very much! is there a gasket to fit as I change the flange?

better to stick to OEM or upgrade to ashcroft?