Search results

Slacken off the injector pipe nuts to see if fuel spurts out when cranking. Rags to avoid a mess and keep your body and eyes well away. Report back .

Like me then... The car is only locked and unlocked via the fob once a week, when we go shopping. Its never locked when home. I wonder if I should lock it more if that would help the micro switches stay free, if indeed they are sticky.

I've played around with it for an hour and I can't get it to 'fail' again, typical. I did notice maybe a 1 sec delay on the drivers door compared to the passenger door switching from 12v to GND very rarely though, maybe 3 times in 30 toggles. If it did it , it immediately wouldn't do it again...

I believe its to trick the engine into thinking its cold to put the glows on to aid hot starts. Sorting the modulation will fix that. Pull it all out and junk it.

Well, I'll go to the bottom of my stairs! Yes, got nano but not tech savvy and I don't think I've seen that menu before.Dont have to get it out very often though as my 2001 td is proving quite reliable. Used it to set timing modulation and diagnose a faulty pot on a blend motor and that's it...

Just went to download that and my phone is asking if I want to download again. I remember now doing those tests on a mates 38 with a dead door,maybe 2 yrs ago, that ended up being 2 broken wires from the A post to the becm under the sill step cover thing. Marty helped with that one over on p38 pub.

Super common on the early models, 3 types of rf receiver over the years, the latest one cures the issue but there are work arounds available I believe. Just what I've read, no hands on knowledge.

I'm sure , fairly sure anyway, that I had this issue before, posted it somewhere on this site and @Datatek answered, seem to recall it was probably a sticky latch micro switch. Spent over an hour searching for my post on 'what have you done on your RR today' and cant find it. im not even sure...

Why do you want to fit belts if no seats? Unless you mean rear load area seats? I haven't got them either. Have you got the end trim panels that fit over the rear small windows? It'll look odd ,I think , with the two side panels only.

Just remembered! Exmoor trim, that's who supplied the 2nd row belts. So a set of them with 2 of the mounting brackets , item 1 in your first pic and your sorted.

They are but off a later model, used when they went to push button doors. The original panels for the early sw had hardboard panels with a fablon type covering which fell to bits once a bit of damp got to them. It'll all fit though I can't remember all the details. My sw body came off an 83 and...

That isn't correct, looks home made.

Yes the reel goes behind the bulge. Item 1 in your pic above is the bracket I have. New seat belts I got from that place down south? That were big on seat covers, cubby boxes etc but I forget their name. Seat belts made by securian (spelling?) and they went straight on.

Yes, memory is fading but I had to remove or slacken off some sort of steady bracket on the back of the pump, other end of the bracket is down by the oil filter somewhere. Seem to recall having to disconnect a multiplug somewhere down there too. All straightforward stuff. You will drop at least...

Yes. Metric 12mm?

25mm gap between the steel rules.

My 110 did the same, checked and cleaned all earth's and starter connections, no differance. Try jump leads direct to the starter in situ. Didn't improve things for me so starter removed and it was knacked. I had some similar too but the crank wasn't deep enough. I'll take a pic with a...