Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Z

    Help with V6 cooling system part number identification

    You probably known this already but all I can find all the whole pipe assemblies named "HOSE-HEATER RETURN COOLANT" PEH500250 from (V)6A000001 to ----------- PEH000224 from (V)3A255000 to (V)5A999999 Both of these are in the LHD section of microcat, but I do not see alternates for...
  2. Z

    Help with V6 cooling system part number identification

    You do mean the T pipe that connects to the pipe that connects to the smaller "bypass" on the thermostat ? It changed in what model year?
  3. Z

    V6 Gearbox ECU

    Lets not pay for code reading at this point I suggest. since this happened suddenly, I am thinking either the sensor wires corroded (which you will be able to test soon) or a solenoid is sticking, especially since this is not happening after car ignition restart. I will look on the VW...
  4. Z

    V6 Gearbox ECU

    This appears to be a tester for this. (Note I never used one, I just googled for it) ATD-5550 - Automatic Transmission and Engine Oil Pressure Tester - ATD Tools, Inc. ATD-5550 Automatic Transmission and Engine Oil Pressure Tester Checks oil pressure in automatic transmissions and...
  5. Z

    V6 Gearbox ECU

    I you look at this nice picture from Hippo (Thanks Hippo!) I highlighted in yellow what I am guessing based on that pdf will be were the line pressure tester needs to be attached. 550-750 kPa or 80-109 psi is what is expected. The good news seems like this test can be done with...
  6. Z

    V6 Gearbox ECU

    Found the pressure tests! http://www.transtec.com/downloads/tech_inserts/ford/94691.pdf Page 8 JF506E / 5F31J / 09A / JA5A-EL FORD, MAZDA, VOLKSWAGEN, ROVER, SEAT The diagram is pretty bland but it does give great information about testing for pressure.
  7. Z

    V6 Gearbox ECU

    Ok I think I got it. Test for an open circuit on any of these pins 1 to 2 turbine speed sensor 3 to 4 intermediate speed sensor 5 to 6 output (vehicle) speed sensor From here...
  8. Z

    V6 Gearbox ECU

    Umm something else interesting. A campaign to replace the speed sensor on some of the transmissions. SB125. I got a partial info here. Supposedly you can test for this but the testing part did not make it. Transmission serial numbers: 0600001 - 1812986 Maybe someone has access to topix that...
  9. Z

    V6 Gearbox ECU

    Other idea a working (thus returning the correct resistance) but "sticking" solenoid. How is the changing to reverse when cold and after 5 minutes ? I wonder if a sticking solenoid would show up on t4. Hard to tell most folks on Rover just replaced all Solenoids.
  10. Z

    V6 Gearbox ECU

    One second. I should have asked. Was the reverse piston ever changed on the transmission ? A lot of 1998 to 2003 or so ( no exact dates thus far) jatco 5 speed had issues with that part where the original factory casting was poorly done and developed a crack. On a Rover 75 this replacement can...
  11. Z

    V6 Gearbox ECU

    I look forward to your results. Did you look at the International rescue map to see if anyone with a code reader was near you? http://www.landyzone.co.uk/lz/f75/lz-international-rescue-map-everything-you-needed-know-191412.html Based on what you are saying, I am concerned there will not be...
  12. Z

    V6 Gearbox ECU

    Umm I though for sure the diff mount would have went. I had to remove mine completely to take a look at it to see when the bushing had failed on the two sides. Let me know if you don't want more theories, I am just trying to give us an idea of what is going on here. With your odb2...
  13. Z

    V6 Gearbox ECU

    You should be able to manually inspect the diff mount, it is very apparent. I have not hear about many Freelanders that did not need a center diff mount change after 100 000 km more or less so it might be the same your way. Was it ever changed on your Freelander ? If this was mine I would...
  14. Z

    V6 Gearbox ECU

    Also did you change the center rear diff mount ? That is the thump I got on 3-4 and 4-5 gear changes
  15. Z

    V6 Gearbox ECU

    Any chance of getting a code read to help? We need more to find out what is bad. Did you give any thoughts to measuring the selonoids resistance values with a multimeter ?
  16. Z

    V6 Gearbox ECU

    So what is wrong with your transmission? Any error codes? (You need a read better then a simple odb2 to see transmission error codes it seems, this is not confirmed) What are the exact symptoms?
  17. Z

    KV6 Freelander, no drive in any gear! 2WD conversion

    A lot of pros in transmission actually have not worked on our transmission. What they do around here is refer to transmission repair books. I tracked down what book they use, please note I have not bought them yet. But this is supposedly what they use. US$30 for each book, also available in PDF...
  18. Z

    1.8 Freelander engine coolant passages connection inlet passages to exhaust passages

    Pictures too if you can! Your videos are great too
  19. Z

    JATCO transmission Mystery??? Please help!

    I am so happy the guess was right, and I am especially grateful for all your expenses and time and letting us know what worked. This way we can learn from this! I hope we will see you on here if you have other issues, it great to learn from everyone.
Back
Top