Search results

Thanks for info Rick the pick. I've disconnected battery with car unlocked and now not needed eka. Anyone got sync mate fir sale or rent?

Thanks all for replying, Grrrr. I am in Essex Re - sync, I have disconnected battery several times and only needed EKA to get going again. Which I have entered allowing doors to unlock and ignition to operate Wazzajnr, are you saying it needs syncing via sync mate tool or similar? Thanks Marky.

Hi all, becm sync not problem...... I have a year 2000 DHSE, which has Sat on drive since December. I connected battery put in eka code, all lights on dash working, engine turns over but does not fire up. Put Battery on charge overnight, but still not starting. Can't smell any diesel when...

Thanks Wammers This is a new (£180) replacement injector. (Need that at this time of year). Is it possible the new injector that I fitted has a leak also? Or is it more to do with not being tight enough in the head?

Thanks Wammers. Will try re-torque.

Hi, Re-leaking No.4 injector. Changed injector and spill pipes torqued to 65nm 48lbft , replaced intake, fired up beast, with no leak apparent. Fired up again today, checked injector and found bubbling at base and wet body. However not as much as original leak. Any ideas, Should I exceed...

Inlet removed, still no joy. For info, Sealey SX024 27mm deep thin wall socket does not appear suitable for injector removal.

Do you mean the depth? If so overall = 80mm Internal max = 60mm. Thanks

socket is described on packaging as 27mm deep thin wall. Thanks Marky

Thanks W Yes, have kept wire out of way. There doesnt appear to be enough clearance along side rocker cover, socket just sits on top of injector nut & will not drop onto it.

Hi all, (2000 DHSE P38) Leaking diesel around No.4 injector has forced me to attempt replacing. So bought (Sealey SX024) 27mm window socket, removed exhaust air intake & here we go.. Not... Socket does not want to reach far enough onto nut at bottom end of injector so I can loosen...

Will grease up and have a go, thanks for tips.

OK thanks, will look at taking manifold off, is that straight forward job?

Hi, I have diesel leaking around no.4 injector, & want to get it tested, soo bought the socket, removed spill pipe & top union nut & wire connector but haven't enough room to get socket on. Can anyone advise if I need to dis-connect high pressure pipe at FIP as well, to gain access. Also now...

Thanks Wammers, is the leaking wire repairable?

Can diesel leak from wire on injector no.4? stuck my head in to try and see where exactly leak is & looks like bubbling around wire is this poss, also feels bit wet around pipe union, can I slacken off and re tighten nut without causing more probs. Any tips on pin pointing leak welcomed...

I bought original leak off pipe from eurocarparts, supposed to be for P38, though it does not state what ID it is. Will wait for silicone pipe to arrive, though not sure now, advice recommends, maybe its not up to the job. Will get some small cable ties in meantime. Hope its not injector.......

I believe so, but have ordered 3 mm ID silicone to try.

Off site help aided genuine owners to break into locked out

Hi. Could metal connector holding fuel leak off pipe be damaged? Changed leak off pipe & still leaking diesel, can see pool at base of No4 injector. Or maybe injector is fault. I have ordered silicone pipe just to see if the braided one I bought is at fault. Have bit of a lumpy start up also...