Search results

Absolutely brilliant idea so that would be +4

Thank you Mozz

Thank you Mozz

My 1995 V8 was single exhaust but had to replace with twin as unable to get Janspeed single

So very sorry to hear that. My condolences to Jean and their family. He will be missed. Helped me a lot Rest in Peace Alan you are not suffering any more.

I feel for him and his family, not a good time.but no pain is good news

It can be a serious problem when the nut has leaked and is wet and smelly I believe

At the risk of jinxing, I have a 1995 Gems 4.6. Love it to bits. Yes pretty well maintaned, oil changed regularly etc. Was my daily driver until Covid and is now a weekly drive but usually for about 30 miles each way. Prevously daily run was 30 miles each way and long runs of 200-300 miles...

If you are enjoying the sun and the brandy then good on you. Just think you will soon be able to suck on Rubberknees fruit

Blimey I been off web for about 6 weeks cos cow ate my satellite cable. and had no idea Keep improving Alan

Well the saga continues She was on Scraeder valves as I needed her On way back, coming thru Glasgow theat air bag dropped to bump stop and wont inflate above 50psi No idea yet what the trouble is as she has a fairly new Janspeed exhaust so unlikely to be the air line So reckon air bag gone even...

Thank you

I checked the plug under the passemger seat. There are three "black boxes" 2 at the front with long multiplugs and one at rear with a thicker multiplug I cleaned the two at the front but not the one at the back. Still the same so she is on Schraeder valves. I think I may have to cut out and...

Yes all cleaned

Well it didnae work. Was all set up yesterday but when I went out today, all was fine but when she dropped to motorway height, the new sensor dropped to the bump stop. No fault registered. Connected nanocom and that sensor was reading rubbish again. The car thought she was too high and dropped...

Thank you for idea and I will try that if it faults again

Yes definitely wobbly on shaft

Sounds like the pipe to the filter is blocked at the filter?

No idea was from Island 4x4

Calibrated her today at last. Had changed one of the rear sensors With blocks in place all sensors gave sensible answers except the new one. The original side read 109 and the new one 147 !!!! Of course that figure wouldnt be accepted. Took the wee arm off the spring and moved it up and down...