Search results

Thanks, just trying to understand the system

It does say tighten bolt, but to my way of thinking,they fail due to the metal rod going through the rubber by the metal sleeve, if there was a small bit of movement that wouldn't happen

Ok folks, I have now replaced the offending offside airbag, both height sensors, and need to fit the nearside airbag, but I stupidly miss-placed the new olive for the valve so dont know if I can aquire a complete valve of just an olive so nearside bag will have to wait, ( any ideas if I can get...

Really appreciate all the help. I have replaced the airbag on the offending offside and all seems good, will replace the nearside this weekend, just one problem, I lost the olive from the valve, doesn't look like I can get another valve, so any ideas, the old bags had the guest push in type but...

Thanks That's brilliant, another silly question, when fitting new height sensors, do you tighten the bottom arm up tight or leave a bit of movement?

cool, where are they located?

Thanks for that. anyway I can check? or service them

Question, when I fit new bags tomorrow, could air be leaking back through the pipe, as I can't find leaks on the old bags

Mobile mechanic sounds a good idea but have now ordered new bags, just seen on you tube a kit to service the compressor, anybody done this and are there problems? just one more thing, now that I have learn't a lot about the suspension I cannot remember pushing the self levelling button and...

I know it could be a bag but now sitting on the drive all level no jacks, if I move go found the block it will probably sink, just forgetting the bags for a moment, because i have had really odd things happen with this motor, in my opinion electrical related, i.e coming home from Aberdeen up...

not heard that one.but a good un

yes thanks, when I looked up removing the air tube at the top of the bag it says undo 10 mm nut, looking at it I don't think its a nut, is there another system if so, how do I detach it, couln't find the info on youtube

Just wondering, if I replace the airbags with springs, apart from having to have the ECU programmed are is there anything else I should Know, also after fitting, can I drive about 5 miles to have the programming done?

Problems with air suspension again, on my way home and the offside rear dropped, managed to get it home, changed the height sensor, the vehicle only seems to raise when I jack it up on the tow bar, the compressor runs ok. took the vehicle around the block and it dropped again, could be a faulty...

why is it that i can lock the vehicle with the remote from quite a distance away but I cannot unlock the vehicle unless I hold the remote next to the car.

Please have a look at Paddock spares, This tool is specific for the Disco,

I certainly wouldn't argue with you but in it's description it says it is fully obd11 compliant, but that said it is not relevant to my question about the sensor change

ok thanks, it reads codes ok and knocks out warning lights but don't know what else it does, will fit the new sensor when it comes and c what happens

so when I fit the new sensor and take it off the jack, what will happen having not disconnected the battery, will it inflate but not even with the other side or not inflate at all?

Brian I bought one of those diagnostic tools from Paddock ( icarsoft ) can you calibrate through that?