Search results

But I do agree with the stress being increased and is why I would not like to go 30mm it is not necessary

The same stress as an offset modular? The tyre footprint and pivot point in the same place on the hub?

Hi guys hope I'm not becoming a pain but I have another question!! I was going down the modular route but I may tame it down abiut and just space my wheels out abit with a decent set of hub centric spacers. Question is most of them are 30mm I've found some at 25mm but ideally I'd like 20mm or...

Thanks, I had thought about the gearing with big wheels but didnt realise to the extent and I had a rethink. I already have 255 65 16 road tyres on so I will make the lesser jump to 255 70 16 ATs due to what's been said

Thanks guys appreciate the replies I'm getting some good info from you lot

Senario.....A td5 under load going up a hill say holding 2800rpm in 2nd to maintain speed The same car but now with a remap going up the same hill at the same speed not accelerating but maintaining, now the engine has more power is it under more strain and higher exhaust gas temps or with it...

Hi guys sorry for another wheel/tyre thread I know you love them. I'm after a set of discovery 2 16x8 et 25 modular steels. Wheres the cheapest place? Found many without the offset for a good price but not with! Also while I'm on, any recommendations on mild at tyres, they will be used...

Not for me ither sorry

Yes I do sorry!! I did say relay in my original post

All sorted! It was the starter solenoid! It was clicking but I just swapped it out with the air lift solenoid under the bonnet that I dont use and hey presto! What are these contacts you talk of and where are they please for future reference? Thanks

Hi again! 2003 td5 auto wont start. Mrs phoned me today as I'm away and the car is now sat in her work car park. Ignition on all lights come on and go off as they should but turn the key and nothing! It's in park and car has been unlocked and locked lots of times to try for faulty immobiliser...

I'll do that l, thanks again

I dont have a manual sorry. That's good to know as it makes the same beeps when driving and a problem occurs!

Hello again! What does the 3 beeps on start up mean? 2003 td5. I have no warning lights?

Tested the wires off the modded valve and was getting 1.8k! Removed the valve and got perfect readings so snipped off the plug on the shuttle valve and used the 2 new wires and cut off the yg wire out of the plug on the top of the pump. PERFECT!! Worked a treat. Thanks very much. Seems the...

That's useful thanks

Thanks this is what I was thinking. I'm annoyed i refitted it without checking the switches. Tomorrow I will cut the yg wire and join to it rather than into it then. It can always be soldered back together. If that fails I will take it back out and check the switches! Still odd how the old...

I have the old amigos on and it says it's a shuttle valve issue its intermittent so quite confident it's the wiring in the valve. I have bought a new shuttle valve for £37 and spliced and soldered new wires out of the back of it at the plug so they are additions to the connector not...

Exellent I'll sort that tomorrow

Hi guys I have a 2003 td5 and I have an odd noise in the passanger footwell. If I lie on my back and look up under the dash there is a plug in port and a circle cut out with a plastic circle sump looking thing under there, it seems be be coming from this!? What is this please!? Thanks in advance