Search results

You can try Paddock Spares, Island 4x4, Bearmach, Rimmer Bros, LR Direct to name a few. I believe all are open but delivery may be a bit slow currently.

It won’t take much to pull the push rods and check them for straightness. Have you checked the timing of the fuel pump itself too using the timing kit? It sounds a frustrating issue which could be anything, might even just need a good running in with some decent fuel if it’s been sat around a while.

Nice Landy, welcome.

My opinion is yes fit one, or an alternative as recommended above. For an expedition your going to want comfortable suspension, suitably weighted for your load. With a roof tent giving high centre of gravity you’ll benefit from the roll bars. Like you say, disconnect them if you want/need...

Jeez that is bad, no wonder your having problems.

Definitely clean out the expander. Mine was struggling, gave it a good flush out with brake cleaner & oil and it’s rock solid like new now. When off-roading, especially wading, grit and dirt get into the mechanism and jam it up.

Welcome, check out the 2.5na part of the forum and have a read through. Plenty of opinions. One example; https://www.landyzone.co.uk/land-rover/2-5-good-or-bad.213450/

You’d have to send them a picture and ask. If your buying the seats then to-date you’ll be subject to LEZ so likely have to pay for your recent use. It’s only intended to be station wagons that are exempt, yours looks like it was a commercial 90 hard top which has after market side windows...

I’m not a welder/metalworker but it still looks to have plenty of solid metal left. If you are in an area that gets the roads gritted a lot in winter the salt can bite pretty hard pretty quickly on new bits of steel.

Duplicate post removed

Are the rear seats side facing bench seats or fixed forward facing ones? If the latter it says there you can apply to TFL for exemption. Obviously you’ll need to fit them first, or send an older picture with them fitted. If they are side facing bench seats then you have to pay. Best give them a...

Unfortunately driving it can be the best cure, there’s only so much you can do revving it on your drive. It’s a case of do a few things I.e fuel system, then take it for a drive and see how you do. If it’s still not right you check a few other bits like timing. You also need to consider when the...

I’ve had this a few times, but the last time I jacked it up to release the windup. Front wheel managed at least half a turn when it lifted off the ground!

Nice purchase, love to see pics. As above it’s likely been stood around a lot and obviously waded in salt water, I’d be servicing the fuel system, injector cleaner, premium diesel. Don’t forget it should have a sedimenter in the rear wheel arch. Another job often done by WW owners is to work...

I’ve considered making one myself the right size to fit with elastic/bungee. Few guides via google on how to make your own cargo net.

Welcome. Bit of internet research, if it original factory paint it could be Trident Green. https://www.williamsclassics.co.uk/vehicles-for-sale/land-rover-90-1985-softop-original-2-previous-owners-time-warp-b124-mkb/

Obviously an original petrol in good condition is most valuable. However a decent lightweight with a good diesel is still good value. (Mally has mentioned Dutch ones) A lot have tdi conversions to make them more usable. It’s more down to if you want collectible originality or classic but...

Have a go at fixing it, F!#% it up, then fix that ;) standard landy ownership diy

Presume the gaps to the front and rear of the door are even. When I put my doors back on I got the gap between the tub and door correct first, a small bit of movement in the hinges will be seen biggest at the rear edge of the door. The front should fit regardless. Also where your finger is in...

Nice rolling project, we can feel the love