Search results

Short update, after much buggering about and wire testing ,I have come to the conclusion that the feed wire from fusebox to OBD socket is broken somewhere around the heater. I have now installed a new feed and the socket is now working. 1 problem down and 2 to go. The interior lights are working...

Thanks both of you, I will continue my search today and will update later

Thanks, I am trying to understand the wiring diagrams and pin outs. It may be that the hevac unit has just failed . I will keep everyone posted. thanks again

Footwell wiring all soldered and heat shrunk. Thanks anyway

Thanks, I will look at that tomorrow. weather permitting

HELP, I have an electrical problem and I am at a loss. I have had the fuse box out and there are no burnt or blackend contacts either side. I have no power to the Hevac panel and cannot find which wire should power the panel. also the lights indicating the suspension position are not lit...

Thanks I will

Thanks Kermit

No blown fuses

thanks, I will try to have a look when I feel a little better.

I had a problem with the alarm klaxon the two large wires shorted. bit of smoke and it stopped then I noticed that the HEVAC unit was off and the OBD port was not functioning. car runs ok and I was going to start on the job but I have been in hospital so today , I started the car and the...

Hi all, does anyone know of a good auto electrician who understands the P38, in the North west of UK. I have a gremlin that needs sorting. thanks.

Bet he would have loved being called WaRmmers He was such a cuddly chap wasn`t he ?

I had a spar or two with him ,all that information lost ,so sad Condolences to his family and friends. At least there is no more pain for him and his family should realise how many share their grief. R I P Wammers,

No, not yet. My sons car is coming to me for its pre MOT on Tuesday so I will start stripping out the fusebox and HEVAC then. I think iI am looking for a burnt out wire Its definitely not a fuse. Thanks for asking

Thanks for that, i will check that out.

thanks

Connected Nanocom through computer as advised but cannot connect with either HEVAC or BECM. have sent pm to Marty Uk to see if he is available to look at my BECM. He has a shop IP38 something I think ah well keep looking I suppose Thanks for all the assistance

bump

thanks will do