Search results

Hey Grrrr, not sure I follow. Are you just saying be careful because pressure will build in pump and safety is a concern? I found a tapered-rubber blanking plug to fit in the pump and an extra-fine threaded 10mm 1.00 pitch bolt to screw-in to the pump. Which one do you suggest I use to do...

Grrrrrrr Thanks! I will this weekend. It just wasn't clicking with me how to perform Wammers instructions. Once I watched a video of someone taking a part an abs unit it started making since. For instance modulator/block are used interchangeably by some. A Blanking plug is generic for...

Wammers I was over-thinking the process I just need to fit a blanking plug in the side of the pump where the banji-screw connects into the pump. I was trying to figure out how to fit a blanking plug into the banji-screw end. Will test soon as I find a blanking plug to fit in the pump...

Wammers, Thanks for clarifying! If you weren't comfortable with the Blanking Plug procedure, which part would you source first, The Modulator/Block (ABS Unit under the reservoir) or the Pump (The unit with Accumulator sitting on top)? Still don't know what's a Blanking Plug?

At work now, just read the posts. Is there any way to check the accumulator? It has also been replaced but, it is used.

To source an abs unit I have to the same part number (ANR2239) to ensure a proper-match, correct?

Wow I understand. What's a blank plug and where can I get one or do I make one? Is the high pressure feed the black hose connecting the pump and reservoir? Would cut that hose to insert the plug or are you saying I would disconnect the hose from the pump and place the plug there? Oh, I do have...

I only purchased 1 pump. I referred to the original abs pump as the second one.

Wammers, one more thing tonight. Should I take it and have it Power bled to remove air being stuck in the system somewhere from the equation?

Do you think I should have someone Power bleed it? A power bleed should at least remove all air from the system and remove air stuck somewhere in the system from the equation.

Okay. Not sure if I need another abs pump or modulator block? Should I take it somewhere to have the RR Power bled?

Would those failed plastic pieces cause it to not hold pressure?

Unsure whether to source another abs pump or modulator block? I'm lost as to what to do next.

Pretty sure it traction control. TC would flash in winter snow. ANR 2239

How do I know if Traction control is 2W or 4W?

How do you know which?

Got it! So the modulator and the block are referred to as the same thing.

Just so I'm following the block and modulator are the same correct?

What's nanocom?

Thank you