Search results

I will have a look tomorrow in the daytime as it is cold and wet outside. I will try to make some room in the garage as well so that I can do it indoors. Thank you for your help and patience guys, it is much appreciated!

Do you mean the EAS ecu under the left seat? To be honest I am not sure what to look out for other than a really obvious broken cable or unplugged connector. Mine is LHD if it makes a difference. The EAS has been causing nothing but trouble over the last couple of years. Otherwise the car is...

Port settings are exactly those. Tx buffer responds with FF values. But the Rx buffer is 80. According to the troubleshooting guide should also be FF

Apart from Com5 the others all come up with an error. Weird thing is if I click "manual message" or "fault message" under the functions tab then it pops up as "good idle" and becomes green for a split second

Under device manager it has assigned com5, let me see what the other do

Port5

Oh dear, any ideas why that could be? Or is it just a case of keep trying?

Success with connecting! The com port needed setting, didn´t realise the "EAS Setup" was clickable. Anyway, here are my readings... I am no expert, but the values under "calibrate" look to be off. Faults seem to indicate a few errors with the valves. I have a new spare valve block from Kurt...

Cable arrived yesterday, I installed and downloaded the drivers before plugging in the adapter. But alas still can´t get the software to communicate. The FTDI driver is selected, definitely not just a generic MS one. The car seems to register a connection however, as soon as I plug into...

Thanks Datatek! The cable off ebay has a long delivery date so I ordered the US232R-10-BULK off a local seller. I emailed the guys at FTDI and this is the response I got. Hopefully it will come in the next couple of days so that I can do some tinkering over the holidays. Hopefully it will help...

standard USB-A. Perhaps Datatek you sell the adapters? I got the cable and cd from you a while back :)

I have found these, but none have any reference to the RTS/DTS protocol. https://www.tme.eu/sk/en/katalog/communication-modules_113192/?mapped_params=2:93;375:1444039;2124:1491397;

Ok, I didn't realise there were so many variations. Datatek or pwood999 do you have a link to an adaptor that will work please? If possible in the EU so that I can avoid customs? I installed the driver that came with the adaptor before plugging into notebook and this one is selected, definitely...

Yeah, the cable adapter is a cheap UGREEN one. The ports seem to be ok and I installed the driver but no communication. Will this cable be ok do you think? https://ftdichip.com/products/chipi-x10/ and from a webshop ...

I got the air suspension looked at by a company in the Czech Republic in spring this year and they did al the jobs above, but I am not convinced they did a proper job so decided to investigate. I got this error message. Adaptor should be ok, on the box it says "supports win 10" though I did plug...

I've done som investigation... all four corners go up and down continuously hence why I didn't visually notice whilst sat in it. Could it be a leaky bag? When the car is parked for a couple of days it doesn't drop until about 3-4 days later. My feeling is that they haven't been calibrated...

I will try to investigate over the weekend, the bags are all new as well, though one at the rear is probably leaking as it came apart as I didn't support the axle properly

Hi, before I investigate with laptop... P38 continuously cycles up and down on front, though not to extremities. Sensors were replaced couple months ago for brand new ones, so am thinking whether they nee to be calibrated or something? This has been happening for a while it seems but the old...

Hi, is there a booking.com equivalent for campsites? I need to find a campsite near Genoa, Italy tomorrow. Cheers

I was looking into Davanti Terratoura a while back as they seem to do a lot of advertising. They are made in China I believe.