Search results

I have made two videos of to share but I can’t up load them on here, I will try and convert them,

There are some on eBay but for the price I may as well buy the abs unit

Is replacing the pressure switch easy?

Ok I will try this tomorrow, I will bridge from 30 to 87 I will shoot a short vid and upload it, thank you for all the help

I don’t have the rave cd, but I watched a YouTube video,

How this all started was my abs warning light came on, I checked the sensors and found front driver side sensor had a brake in the cable, I replaced the sensor hoping this would fix the issue, it didn’t I noticed the break fluid was black like Guinness, so I changed the brake fluid and noticed...

This morning I took the car up the road, about a mile I stopped and turned the engine off and I could here the pump, I took the keys out and popped the bonnet and it was running but wouldn’t stop so I removed the relay, that stop it I put the relay back in then drove home breaks were soft and...

They were poor, like driving a Ford capri

Brakes are working but very poor

The pump is not working at all now, the pump was very hot to touch, it’s frustrating as nobody lives near by who could possibly help me out, I’m a bit slower these days as I have been unwell for the last two years and I got blown up in Afghanistan which doesn’t help but I will fix this issue

What do you mean?

Ok drove the Range Rover up the road and stopped, when the ignition was off I could hear the pump running so I popped the bonnet and removed the relay, I’m going to get my ABS pump repaired I’m convinced it’s had it.

Yes I changed the settings and the results were interesting but not sure if it means anything? Pin 30 without the ignition on made the meter screen go blank so to did pin 85 the other pins 0 volts

Ok I have set the meter to holms 200 Ignition off pin 30 shuts of my meter the other pins 87 and 86 are 0 volts 85 shuts down my meter too as in the screen goes off

No unfortunately I’m new to this area where I live so don’t have access to anyone here,

Yes when I put the probes together it reads zero but when I put the red probe to 85 and the earth to the negative of the battery I get a reading of 1