Search results

Attaches to the subframe circled in red. mounted in rubber. Steveesy

[Ok pic of RHS of car at lowest ride height. The other side is down. Its goes up but this side is allways 3-4 inches higher. The core reader though says the front is lower on the right and rear is lower on the left.

ok, understand now. your saying if it is in a different position it may not be throwing a code, but if when it returns to its normal ride height it might well do. is that correct ?. good point would not have considered that. thank you Steveeasy

Not sure I understand this bit but im sure its relevant ,could you make it clearer for a L322 numpty please. thanks Steveeasy

That's sounds great. I wonder if that is all that is needed. have you had similar issues then to alter settings. Steveeasy

Well ive been out today with another 2 rear height sensors to see if the existing ones were working. They do but I still cant get the car to level at the rear. Is there a way to actually see what the factory height settings are.?. The chap from garage said before he looked at that hed have to...

Dwarfer, Thanks for the advice. Ill see if I can pick up some of that spray. Seams like im going to be paying a bit more attention to the system now. Its my wifes car and she was happy with it in inoperative mode. Still don't know what this valve is on top of subframe. the Guy at garage did...

I followed the car and it looked like it was going to flip over. The rear wheels were completely tracking in the wrong direction , looked awful. still Im not the driver. I think I may now know what has caused some of the issues. when I got the new/secondhand rear subframe I did use the...

OK. this morning before I left car sat perfectly. cleared codes and it dropped. took the day off work, drove 30 miles and when I got there told me could not reconfigure suspension today now but would read my codes instead. whats new !!. Still He thinks the problem is not the front left but...

I do remember the code reader having a funny turn at the weekend while plugged in. the screen went blank and a load of numbers filled the screen I removed it then tried to plug it back in and turn on. it would not power up. thought id damaged it (it is my sons) I wonder if it messed everything...

Yes that's right. those were read while on flat ground. be interesting when they get it on their machine. either the ECU is messed up or the code reader im using is useless. funny thing is ive not been able to jack up the front left wheel, the right one lifts first. its really unbalanced...

Thanks for taking that. Just how mine looks though, arm at 90 degrees facing outwards. Steveeasy

Today I had the back going up on its own. Started thinking of putting springs on it but that's a bit of a swear word I suspect. Does not do much for looks either. The Garage says they will recalibrate it so all might be well by this time tomorrow.!!. Steveeasy

Hi, Thanks for this. Yes your right. trouble is ive checked them very carefully. the arms on both sides face outside. They both sit at 90 degrees ish. facing outwards. Ive checked very carefully that the left one is on the left side and so on and they are right and as you say relating to the...

Front left 8.2mm front right-87.0mm rear left-72.2mm rear right -28.2mm The figures show the front of the car lower on the right and the rear of the car lower on the left lower on the left...

Backinblack, thanks for that. The reader I have seamed quite user friendly but Honestly ive no idea why the volts reading on the height sensor was so high. Keep thinking its telling me something. something I don't really understand. A volts reading way above that of the other height sensors...

From what id read, the ZFhp422 box had a fault where the A clutch wore out as it was engaged more than it should be. I wrongly assumed everything else would hopefully be ok. So its coming out again, Before this happens id like to check the internal pumps pressure and it might be better to...

No im not at the moment. the L322 is my partners, she really likes it and to be fair its been really reliable. It been quite a challenge replacing the subframes. The Discovery, ive always had one and they have been fab. gave up last year and got a transit, then found this rust free one...