Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. PastyMuncher83

    P38A Pinking Under Load

    Sorry i can't seem to post the link for some reason
  2. PastyMuncher83

    P38A Pinking Under Load

    Ouch looking at the prices I'll try cleaning it first?! Cheers This one is $20 in the states
  3. PastyMuncher83

    P38A Pinking Under Load

    I can't find anyone selling new purge valves only second hand ones. Anyone got an ideas where to source one- Part no. wtv100150
  4. PastyMuncher83

    P38A Pinking Under Load

    Mine was the 2.5 turbo it did pull well but the pins and needles I would get from the vibrations sitting in traffic at tick over began to irritate me!
  5. PastyMuncher83

    P38A Pinking Under Load

    Oh dear Wammers if I didn't need to depend on your fountain of p38 knowledge, promoting those oil burners would be fighting talk ;/ I've only had one and it was a classic with the VM so am understandably against them. But I have noticed the MAF fitted is one of those pattern/no brand types...
  6. PastyMuncher83

    P38A Pinking Under Load

    Haha I love this forum, sounds like this could be the cause thankfully. All the noise of pinking with none of the fault codes. Thanks biketeacherdave, from mr.f*ck knuckle ;)
  7. PastyMuncher83

    P38A Pinking Under Load

    Thanks for that, my gas system does have advance the timing when running LPG, have a few questions!- Could a faulty MAF even cause pinking? Is there anyway to bench test the MAF, I don't really want to spent £150 on a new one to find it makes no difference. I only have basic OBD diagnostics...
  8. PastyMuncher83

    P38A Pinking Under Load

    How do all, My 2001 4.6 Thor has started linking really bad under load. It has a 12 month old LPG system fitted but does it on petrol or gas. Not long after the LPG was fitted I replaced both coils, new plugs and fitted 2 new coils. I've pulled only 2 fault codes with me cheap eBay generic OBD...
  9. PastyMuncher83

    Diagnostics Needed- Yeovil area.

    I've used a generic obd2 scan tool pulled off a couple of codes but neither what I was expecting to find. Thanks everyone
  10. PastyMuncher83

    Diagnostics Needed- Yeovil area.

    Ok thanks got a couple of names will message you. What a service! Keep digging may make it out the other side eventually?!
  11. PastyMuncher83

    Diagnostics Needed- Yeovil area.

    How do, Apologies if this is in the wrong section but I'm trying to solve a pinking issue with my '01 P38. Anyone in the Yeovil area have suitable diagnostic equipment? Thanks
  12. PastyMuncher83

    P38A EAS LEAK FINDING

    This is the one I bought the chap is sending out a free replacement- https://www.ebay.co.uk/ulk/itm/121952680944
  13. PastyMuncher83

    P38A EAS LEAK FINDING

    Ok, the one I've bought says its stays red just stays on for 3 seconds then goes off for 10 and comes back on red when codes cleared. Might open it up and check connections. Since the above incident I know get what can only be described as whale noises from the front when I've been driving for a...
  14. PastyMuncher83

    P38A EAS LEAK FINDING

    Yes followed the instructions that came with it as above. Only difference being mine has a red LED on it. I've started carrying the laptop with me wherever I go now!
  15. PastyMuncher83

    P38A EAS LEAK FINDING

    Well it spat it's dummy out on the way home for the first time since switching to eas. Came up with an EAS fault left the arse end in the air and the front deflated on bump stops. Got it home like that's as the eas kicker I bought did nothing ;(, and plug in the eas suite cleared the fault and...
  16. PastyMuncher83

    P38A EAS LEAK FINDING

    Sounds like a good place to start. I've got the valves and had a problem with the n/s rear going down so replaced the feed line. I guess the spray bottle method is just set it to high and spray everything you can get too. Will give it a try thanks
  17. PastyMuncher83

    P38A EAS LEAK FINDING

    How do all, I've been running on my newly re-fitted EAS for a couple of months now but seems i still have a leak. I have 4 new bags, new compressor & new valve block. Also i have replaced both rear lines with 15 Bar rated vacuum tube, cut with the proper tool and chamfered with a pencil...
  18. PastyMuncher83

    P38A Sat Nav Question

    Ok thanks for that, let me know how you get on once yours is back. I think I'll do similar and send it off. I don't even get the set option come up, just gps navigation or monitor off, even on first start up. Anyway will leave it for now and see how you get on!!
  19. PastyMuncher83

    P38A Sat Nav Question

    That obvious.... Have to get your 5 a day in it's the law round theses parts
Back
Top