Search results

Is the engine starter relay a 5 pin & lights a 4 pin?

It’s like when the leak off tube fails between the injectors,nothing shows but allows the air so to the system & drains back to the filter

Have you a 300tdi bumper with the reflectors by the rear door?

You don’t get bubbles with the soapy water trick. You may get a rainbow off the diesel… When you turn the motor off it’s a capillary action pulling the air back (That’s why an electric pump pushes the diesel out of any pin holes or loose joints)

By pass the sedimenter These can rot on the top causing pin holes in the top pulling in air but showing no leaks of diesel.

Make sure you put the bolts in the correct holes. I think there are different lengths

Is that a new form of exercise (Morning all)

Undo the end of the grease gun to release off the nipple. The end is spring loaded and set to a pressure not to release easily. And always wear a beanie hat. Saves washing the oil/grease/blood out your hair

RIP Tony

Replaced stub end cover…well it lasted As I was in my local 4x4 indi got a new 1(& a spare) found out there are 2 types.mine is the early version(later version smaller in height)

Police cars use a waterproof stuffing gland for there cable. They must seal these up as well. Never been a fan of drilling holes in roofs even for flashing beacons

check panard arm… I had super pro in that & change to oem. All other pro bushes were fine. (Easy way,stand outside motor with engine running and twitch the steering left/right. See if the body work moves) And check drop arm nut…same as above it will jump if ball joint has gone. (Have you done...

Have you seen the price of the demountable campers? Good idea as you can go free and have use of a normal motor

where you putting the switch? Where you putting g the relay? Go behind the speedo & find where the speedocable goes through the bulkhead. There are a few grommets you can use Otherwise you have to move the dash around to get out where the loom comes through & behind the lower dash

Panard rod bush for the wobble? You using poly bush or OEM bush?

Welcome. You want comfy miles go for the Hilux. This motor arrives from Germany,Greenlanes for 3 days has a week of relaxation and goes home. Also does continental trips through the year. Your conversion will be fun and the removal of the pto will be easy. It should either bolt to the...

Are you based in Wiltshire??

They are only useful to workers without kids.. Value….. You will never get what you have spent on it. Under 10k for a value

Is your fork reinforced on the pivot point? They used to break on the cup and slowly fail

Bolt on bits has plenty of ideas & switches. Can be a pain to search the site for ideas but I buy loads when I shop from them. Best bit about them pods your right by the dash so easy to hide electrics/relays etc