Search results

Thanks both. How long before the engine goes bang with one of those being broken?

Just changing the oil on my 200 tdi defender. For some reason I just stuck my finger in the sump and found a small piece of metal pictured below. I don’t know how long it’s been in the and can’t see any other bits in the waste oil. Anyone who what it’s from please? pictured with the small...

Evening All, Just getting round to refitting my 1992 defenders rear wiper. Offered it up but can’t remember how to fit the bloody thing securely. I had the motor rebuilt and working if the cradle is around the wrong way. If anyone has got pics of theirs fitted as a guide I would be really...

What 30mm hub centric wheel spacers would people recommend out of interest? I have got some boosts so want to get a set.

This is similar to what a bought. But managed to find a uk supplier.

I used my standard Aerial and got a splitter aerial lead fm/am dab from the stereo and it worked fine. Think I got it off eBay for about £13

I’m having a similar problem on my 200tdi. I have fitted wipac leds. All the indicators and hazards work ok but the tell tale on the dash isn’t working

i have just bought a used RDX door card for my 92 defender. Just trial fixing it and can’t see how it fits. Looking at the bolt on bits eBay ad for the door card it says it should fit using the original fixings. Problem is I replaced the bottom section of the door and can’t remember what the...

Hi I am selling my freelander 2. 2010 51k miles. Ebay link below. Car is located in Cornwall. If anyone is interested please give me a call on 07709492523. http://www.ebay.co.uk/itm/273072437057?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2648 Cheers Simon

Cheers. Yeah it wasn’t the best fitting thing in the world. The cut for the seat box cover mount on the drivers side was miles off. Managed to get it all done and it doesn’t look to bad.

i just been fitting my exmoor carpet to my 200tdi today. Just trial fitting the seat box carpet, but the drivers side cover looks to be to big. Does anyone know how wide the cover should be please? I must have got two passenger side covers at the mo!! Crappy pic attached

No i used normal rivets, didnt think until i did it!! I will get busy with the sealer. Thanks again.

That one looks about right to me!!Thanks Al

I have fitted some 2nd hand sliding windows to my hardtop 92 defender. Does anyone know the part number for the rubber strip that covers the rivets please ?

Ah ok, I might need to make up a couple of brackets then for the bit above the door to attach too!! Cheers

K14 is that brackets above the rear door? Have you got any photos please?

Thanks Scobby

Hi all, I have got a 1992 defender, which was a van back that had the alpine windows fitted by the previous owner. I bought a 2nd hand rear headlining and recovered it. I went to offer it up earlier and noticed there doesn't appear to be any fixing points for the rear finisher above the rear...

I am looking for a drivers side inner panel as pictured which I believe was used from 1994 on which uses a different regulator than the older models. Also need 4mm glass for both drivers and passenger side. Thanks In Cornwall ideally.

I recently bought Hardura seat box and footwell set from LRI solutions for my 1992 200. Unfortunately the order was delivered incorrectly so is going back (LRI were really helpful, in sorting the issue), and to be honest I didnt really like the Hardura finish anyway so probably worked out for...