Search results

Hi all just replaced engine bay fuel pump and sender unit and still no joy have a fuel pressure sensor coming.tomorrow so fingers crossed!!! I did notice one thing when I cracked the fuel rail open fuel only comes out slowly and no pressure there does anyone know what would.cause this??

Cheers for your help the repair kit is only 10 quid so worth doing to rule it out cheers for the help I will let you know the results

Yeah OK I will give it a go just wondering why the Mil light is on as well I had it cleared and it came straight back I changed cam sensor and still the same just don't have much hope if it wouldn't cause the engine light to come on

One more thing sorry to be a pain lol just getting used to mechanics would that o ring cause the engine light to appear

OK so I just buy regulator repair kit and fit it? Guessing airintake Inlet Manifold all got.to come off? Any special tools need for the job? And finally anything.i need to be careful of? Thanks again recently done waterpump and thermostat so shouldn't be a problem would that o ring cause it to...

Also soon as the easy start isn't being sprayed it cuts out complety

6000 kpa when cranking engine over I have checked the wiring to fuel sensor and seems to have the one that goes direct to ecu box?? And the engine doesn't start at all with the key only while easy start is being sprayed into air intake I cracked the fuel rail open and only dripping out no...

Hi all thanks in advance for any help received ;) Recently had a problem with my freelander 1 td4..... Water pump broke so replaced the pump and thermostat after land rover had been sitting 3 months started her up and was little rough on tick over but cleared after a few seconds took her for a...

Here's a screenshot of the readings

Hi all thanks in advance for any help received ;) Recently had a problem with my freelander 1 td4..... Water pump broke so replaced the pump and thermostat after land rover had been sitting 3 months started her up and was little rough on tick over but cleared after a few seconds took her for a...

Hi all just fitted new water pump to the freelander 1 td4 all went well apart from I cant get the thermosat pipe to go back in the housing? Has anyone got a easy way to do it? Only thing left to do and shhes back out on the road cheers daniel

Today when under the land rover I notied my bottom half of engine moved when I tightening gearbox bolts back up would thus be likey to be the rear engine mount and how easy is it to get to ?? HopING could just of worked loose? Or would it be a new engine mount Thanks in advance

Hi just wondered what size off rpad tyres I can fit on a land rover freelander without a lifting kit Thanks in advance! Have looked on forums but finding different answers Cheers dan

It went away but seems to come on when I turn full lock one way and then disapeares when drive down the road a bit mainly noticable on stamd still

Just drove it to the garage and its gone away now strangely

Yea td4 yes still unpluged at the minute it ran good without it.for a week now vibrating badly.

Started last night when driving all of a sudden it went very vibey and can feel it all the time I did unplug my maf sensor the other day as had loss of power and it made it.loads better could this be the problem?

Sorry its 2001 td4

Im about to take my intake manifold off my freelander 1 is there anyrhing I should know before doing this as never done it before? Thanks in advance Dan

ok tried cleaning the air flow meter today agin with no result and thinkjing about it i think my fuel pump under the bonnet is leaking the tiniest bit so think im going to bite the bullet and buy them both not that expensive and pretty sure i could fit it all my self thanks for help dan