Search results

Hi guys just a quick question before I start the job. 4.0l v8 changing the cats read rave about it and I need to take gearbox cross member off. Has anyone managed to change them without doing this Thanks in advance

I changed min entitling ago only took 30 mins including making coffee. Was on tight but managed to get a 22 mm spanner on the nut at top of the thread one push and it was loose.

No it doesnt do the mislock beep at all just had a listen to it lock and unlock and the rear drivers door seems to twang like a spring when the button goes down

Hi guys right got a a slight problem. Parked car up and locked it as usual went back to it the next day unlocked it with key fob buttons and indicators didn't flash as usual thought it strange then noticed that none of the interior lights go off at all no matter what I do. I've pulled all the...

Only if your in a foreign registered artic ;)

I'm puzzled as to how you would know that all the air bags have same amount of air in them. Reckon it could be a bugger to get level

Mine is part of my surname Wadrop and the 1200 is from the 1200 bandit I used to own

He is in south elmsall wf92df website is www.lpgc.co.uk

Worzal give simoin a try at lpgc he is good and reasonably priced only does work that is necessary. He is one of these ones that prefers to fix rather than replace.

Cheers guys after reading what you have all said I think I've made a boo boo with it so may as well take them off and see about getting them re balanced

Marked the flanges but not the shaft don't understand what you mean about correct rotation though

Hi guys right I've changed front and rear ujs and I now have developed a low drone from the rear end over 70 mph. Below 70 it's fine. I've been back under car and not got any play in the new ujs and all the bolts are tight. Oh it's a my 2002 4.0 cheers guys for any light you can shed on it

Lpg only goes up in the winter really ive heard that its pric is linked to heating oil and heating gas hence the seasonal rise. As for simon at lpgc I cant fault the guy he fixed mine in December last year only did what was required in the rain as well as his workshop was full and couldn't get...

Oh I never throw anything away much to my wife's distain:D

Haven't tried anything with it yet heart sank vis just done a load of work on it and it's been off the road for a couple of months so was looking forward to driving it again. I've found one at emmotts for 25 quid so will get that rather than mess about. Thanks again though Alan

Yeah it's siezed didn't want to risk changing ujs and putting it back on for expensive things to happen. Cheers Alan will order one from emmotts

It slides in and out like the front one

Hi all doing the ujs on my 4.0 front one went fine got rear one off and it won't slide at all any ideas why?? Now if I replace it what do I do about re fitting without any markings on the shaft. Thanks in advance

starter motor recoiling???

Sorry guys been a tad busy yeah looks like ill have to drill them out and replace them.Only reason I asked is sometimes there are short cuts that people know about