Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. dev742

    Disco II TD5 Turbo flange nuts

    Yes the manifold could turn sour real fast. Especially with the fact the Landy IS my garage, so all of the repairs are done on the driveway :D Will get me some 3/8 equipment for sure, but the first thing I am going to attempt is to just bash it like this, certainly under the weight of the...
  2. dev742

    Disco II TD5 Turbo flange nuts

    That is the golden advice I have probably been looking for Certainly going to get a 3/8"" set I have a 1/2"" and a 1/4"" and some adapters, but having a 3/8"" set would be way more useful. Thanks for the wisdom!
  3. dev742

    Greetings from Poland

    A pretty accurate sticker! I thought of making something along the lines of "Will eventually reach 100km/h if the wind allows me to".
  4. dev742

    Greetings from Poland

    I was born and grew up in Eastern Ukraine, moved to Poland for my studies in 2020. Can you believe there are no more Tesco's in Poland? They closed up for some reason. These are the adventures you always remember, that's the stuff!
  5. dev742

    Disco II TD5 Turbo flange nuts

    no welding machine sadly, but I have been pondering about drilling a through hole through the nut extractor socket and then putting a screwdriver or a punch through to use it as leverage to turn the socket. The space is so restricted I can't even put a regular spanner onto a nut extractor...
  6. dev742

    Disco II TD5 Turbo flange nuts

    Very good point! I don't have one but these are not expensive and are readily available. AND are multifunctional, so a good investment anyways. I will have to check what size saw will fit in there, with some slack for it to oscillate.
  7. dev742

    Disco II TD5 Turbo flange nuts

    ooh, that is a good point, I have to try a 6 sided spanner - for some reason I just can't seem to find these at my local hardware store. The 6 sided socket did not do much, the nut is flanged and is stuck on good. It's the stud/nut that is right above the regular oil filter housing (and right...
  8. dev742

    Greetings from Poland

    Hi everyone! Long time lurker here. This forum is so full of good advice, good info and general good knowledge (and also vicious discussions about "oil for TD5") that it was literally no bigger need for me to make an account and post anything - pretty much everything has been covered, every...
  9. dev742

    Disco II TD5 Turbo flange nuts

    Good day folks. My first post here (and its about a rounded bolt:rolleyes:) Been fighting the flanged nuts securing the TD5 turbo assembly to the exaust manifold, the (presumably) 13mm ones. Rusted solid, but generally in good shape - not flaking or cracking, just a good layer of rust on them...
Back
Top