Search results

same year engine type was out of 97 4.6 petrol gem engine i dont have hazard lights when locking car now

have tried three now from landy grave yard this last one come off can same year and was running when took in but on my car i have no lights when locking and still no check engine light

yes checked it as advised and working as should but no power coming out fuse box

right i have found out the two wires that should be live and there not there live at fuse but not when coming out main fuse box when you power one it turns car over the other just sparks any ideas anyone please !!!

but if its a sensor would the check engine light not light im in the same boat when it comes to electrics i hate them

ill check spark and fuel tomorrow did i say i dont have check engine light on dash

its been lpg converted too if that helps in a theory you may have

ill check spark tomorrow now and fuel still not got check engine light on thou and black box is still showing no power to ecu im in rainham essex

right just an update there power to the fuse you said about checked it in book and tested it power to the relay your on about if i put tester in powers up on two pins and if i put tester in connector on ecu it clicks also if i wiggle/seperate wires going to ecu plugs it will now turn over but...

the second or third one on the left side ??? if so no power getting too it also the two relays clicking are the ones on bottom left if your looking at fuse box from front of car

right battery been fully charged just took off charge and put on car ive tested the cables on the red/pink ecu plug with ignition on and a black wire is pulsing no power though im getting a click from realy for fans too is fuse 37 the one with like lightening in it 20 amp if so there no power...

hi ppl im new to this so please bare with me i have a range rover p38 gem engine 4.6 i need to check if my ecu is getting power so i can use a sync mate to sync my becm and ecu together hope someone can help cheers in advance