Search results

Power loss is from idle so 750 up to approx 2000 when the turbo kicks in. I havent noticed any smoke really, but haven't been able to drive it for about 2 weeks now. There might have been slightly more smoke but couldn't be sure.

Thanks Chaser and Phantom mark, I was reading the RAVE cd last night and read the same, but wasn't sure if it was just me looking for solutions. Il get in contact with the dealer and see if they can trial a new MAF and see if that fixes the problem. Iv also been reading on the forum that the ecu...

Hi, glad you found my info useful. Mudcrawler the pods dont stick out very far from the front of the car due to the curvature of the bumper so they are almost inline with the number plate id say it was with in about 1cm of the number plate probably less. When I get mine back il take a picture...

Hi, Iv got the pod style driving lamps fitted to mine, as per my picture. Moog the difference with the pod style fogs and the pod style driving lamps as I far as I can tell is that the driving lamps will only come on when the full beam is used whereas the fogs can be put on with the dipped...

Hi, Thanks for the advice refering to Roverron, I have heard of him but didnt want to go down this route as its not fixing the original problem its merely covering it up with something else, which might then somehow cause another problem later on. Chaser, Yes it is a main land rover dealer...

Hi, I replaced it with a genuine one which I bought from euro car parts, its this one, Bosch Land Rover Freelander Td4 (1997-2007) Air Flow Meters - Euro Car Parts UK’s No.1 Car Parts Retailer I was contacted by the dealer this evening and they are thinking that the ecu needs replacing...

Hi, having a problem with my freelander, there is a loss of power from idle to 2000rpm(approx) when the turbo kicks in. I have searched on here and thought it would be the MAF sensor, so checked it by unpugging it and it ran much better, so replaced it with a new one, but its not fixed the...

Hi, iv just upgraded my parrot bluetooth for a newer version the mk9100i (I think thats what its called) any way it gives you handsfree for your phone and also has the required plugs for an ipod, usb pen and also a 3.5mm jack so basicaly anything can be plugged into it. I got it for a birthday...

Hi, Mine have been doing it as well recently, yes it has been covered on here before. I have cleaned one side (started raining so had to stop) and that has solved that side from sticking. This is how i cleaned mine; chock wheels take off handbrake and lift car appropriatly, Remove wheel, then...

Hi, I bought some last year, heres a link to the thread I posted in about buying them from costco. http://www.landyzone.co.uk/lz/f9/best-225x55x17-tyres-my-fat-chick-78358.html

Hi their, if you havent already fitted the wire their is an easier location, its on the drivers side (RHD) there is a rubber grommet with nothing going through it. just remove and poke a hole in it push your wire through and re-fit. if you look in the engine bay drivers side start between the...

Do you mean to fit lights to be used as fog lights? You could possibly fit lights in the lower grill wired up to the switch for the fog lights. Im not sure how much the lights would effect the cooling of the car but would have thought that small lights would not cause much of a problem (but im...

Hi, I had the same problem with mine, its a captivated nut (moulded into the plastic underneath), it is also not a normal hexagonal nut its circular with groves to hold its self in the plastic (difficult to explain but you will see when you get it out). I ended up drilling the head of the bolt...

Its a realy simple hole to cut out if you use the template, you stick it on the bumper using masking tape or similar, then you simple pilot drill (about 3mm) through the paper template and the bumper where you are shown by the crosses. Then take the template off and use a junior hacksaw blade...

It just involves a drill, small file, screwdrivers and abit of tape, think I also used a skewer to help get the wire through the grommet in the bulkhead into the cabin. The hardest bits in fitting is the drilling the hole in the bumper (I didnt want to cut a hole in my nice new car) and pushing...

I think they are great they are definatly worth getting, the link to one of the other posts is here; http://www.landyzone.co.uk/lz/f9/fitting-spotlamp-pod-kit-67628.html hope this helps make up your mind.

If I rotated say every 5000miles the wear differance should be only very small? Shouldn't this keep them all at about the same tread depth therefore little wear on the drivetrain, surely rotating them frequently is better than having to buy 4 new tires everytime 2 wear down?

Thats a great idea, il ask on friday while im their. Their might be someone out their looking to replace just 2 of their synchrones like I was. Will definatly be rotating mine this time now knowing that i have to replace all four each time.

Iv just ordered some new michelin lattitude cross's, got them on order at costco fitting them on friday, at a cost of £98 a tire fitted but by having an executive membership (£30 extra) you get 25% off (4tires for the price of 3). So will be spending a total of £324 for 4 tires. I was happy...

Surely redhand, if it was a freelander service manual it would simply say drive through a small puddle, sit back and watch for the doors to fall off?